[FrankJScott]

[center][/center]

[center]SEE THE BEST SEX DOLL FEET ADVICE NOW[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Nobody gives standing feet a reflection until the day they need them, and that's when the enormous difference becomes evident. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Understanding the difference before you order is one of the simplest ways to avoid a frustrating purchase.

Standing Upright Without Support
The basic difference couldn't be simpler. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Without these bolts, non-standing feet limit the doll to sitting or lying down, and attempting to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.

Necessary for Photography and Display
Necessary for photography and display: standing feet. A doll that stands unaided can be photographed full-length with no evident supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. With standing feet, a wide range of poses and settings opens up that non-standing feet can't match; it's the primary reason most photographers specify them when ordering.

Stability in a Wet Environment
In the shower, too, standing feet are critical. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and unsafe. Unlike non-standing feet, standing feet don't absorb water thanks to the metal bolts, and they give her stability in a wet environment. A real safety consideration is at play here: water absorption in non-standing feet can lead to rust and eventual structural failure.

Foam or Filler Inside the Ankle
Shower use deserves more detail, being the source of a lot of damaged dolls. There's foam or filler material inside the ankle with non-standing feet, and it absorbs water when it gets wet. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become evident, but it's fundamentally unfixable once it starts. Nevertheless cautious you are, keep a doll with non-standing feet out of the shower, because the water will find its way in anyway of your precautions.

No Hanging Hook or Storage Case Needed
Standing feet bring easier storage, too, in some setups. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. For buyers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a solid choice. Preferred by some purchasers is the apparent and accessible storage that standing feet make possible.

A Few Percent More Expensive
On the drawback, standing feet are somewhat more costly and somewhat heavier. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. For customers on an incredibly tight budget it's worth knowing about, even though the difference is small and it's usually worth the additional cost.

A Minor Aesthetic Issue
The bolts can become apparent if the feet are bare, and that's the other drawback. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some customers find distracting. Because this minor aesthetic issue can be solved by covering the feet with closed shoes or choosing footwear that conceals the bolts, it's not a reason to avoid standing feet entirely.

Perfectly Adequate for Many Buyers
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly adequate when the doll will chiefly be in a bed or on a sofa. Customers who know what they want can make this choice totally validly.

Softness as a Selling Point
There's a small softness and flexibility to non-standing feet that some purchasers find more comfortable to touch. On its own this subtle difference doesn't typically justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

A Doll That Can No Longer Stand
Attempting to stand the doll in any case, after forgetting what kind of feet they have, is the huge risk buyers run with non-standing feet. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this usual mistake causes real damage. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're purchasing them.

Bolts Are Embedded During Manufacturing
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. The short answer is no, not easily. Adding the bolts subsequently requires cutting into the feet and installing new hardware, which is expensive and often doesn't work as well as the original, because they're embedded in the soles during manufacturing. If you're considering acquiring a doll without standing feet, and you think you might want them later, it's better to purchase a doll with standing feet in the first place than to try to add them later.

Practical Advice by Use Case
Picking between standing and non-standing feet? The functional advice is simple. Standing feet are needed if you plan to photograph the doll, display her standing, or use her in the shower. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly enough. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small extra cost is worth it.

A Gender Consideration
A gender consideration deserves a mention as well. Standing feet benefit male dolls more than female dolls in general, as they're heavier and harder to store any other way. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and needs more space. Storing upright becomes possible for male dolls with standing feet, a genuine upside if you don't have a lot of room.

The Aesthetic Difference
The aesthetic difference between standing and non-standing feet deserves a final note. The bolts make standing feet a little harder at the bottom, and this can be noticeable when the doll is barefoot. The hard soles look marginally industrial, so some customers find this less aesthetically pleasing, especially on dolls with delicate features. Softness and a natural look are what non-standing feet offer, and some customers prefer them. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.

A Quick Routine Check
Maintenance is another angle that's worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the appropriate tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them slightly lower-maintenance in the long run.

Standing Feet and Flooring
How the doll stands on distinct surfaces is also influenced by the bolts. On carpet, the bolts grip well and the doll is stable. Bolts can slip on hard flooring, especially a smooth floor, so the doll may need additional support to stay upright. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.

Barefoot Photos and Exact Proportions
One final consideration, frequently overlooked, is how standing feet impact the doll's overall proportions. In barefoot photos, the way the doll looks can be marginally changed by the small quantity of length the bolts add to the foot. The effect is subtle and typically invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. With non-standing feet there are no bolts, so no such effect, and the feet are a little shorter and more natural-looking.

One of the Simplest Upgrades to Justify
The bottom line is that standing feet are worth the extra cost for most buyers, because they open up posing, display, storage, and shower choices that non-standing feet don't. Only customers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out click for source not to mention read review and see post for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]