[FrankJScott]

[center][/center]

[center]SEE BEST SEX DOLL FEET GUIDE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
You won't think about standing feet until you need them, and then you'll find the difference is vast. It's a small detail on the spec sheet that changes how she stores, how she photographs, how she wears over time, and what you can do with the doll. To steer clear of an annoying purchase, grasp the difference before you order; it's one of the simplest ways.

Metal Bolts Embedded in the Soles
The basic difference is simple. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. The doll can only sit or lie down on non-standing feet, which lack these bolts, and trying to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

Full-Length Poses Without Visible Supports
Standing feet are what photography and display depend on. A doll that stands unaided can be photographed full-length with no visible supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the main reason most photographers specify standing feet when ordering.

Metal Bolts Keep Water Out of the Feet
Standing feet are also crucial for shower use. It's impractical and risky to lie her down in a shower, which is why a doll for showering with needs to be able to stand. In a wet environment the standing feet give her stability, while the metal bolts ensure that the feet don't absorb water the way non-standing feet would. It's a real safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

No Precaution Is Enough
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Once it starts, the rusting of the metal skeleton inside the leg by the water is essentially unfixable, though it takes weeks or months to become evident. No matter how diligent you are, a doll with non-standing feet should never be in the shower; water finds its way in anyway of precautions.

Space-Efficient Storage
There's also easier storage with standing feet in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. For buyers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a great choice. Some buyers prefer that the standing feet make it possible to store the doll in a way that's apparent and accessible.

Is the Premium Worth Paying?
It's a downside that standing feet are somewhat more pricey and marginally heavier. Few percent higher is the usual cost versus a doll with non-standing feet, with the metal bolts adding a small quantity of weight and the manufacturing process being more involved. If you're buying on a very tight budget, know that the difference is small and it's typically worth the extra cost.

Selecting Footwear That Conceals Them
Another drawback is that the bolts can become visible if the feet are bare. With high-heeled shoes or open-toed footwear, the bolts might be evident in photos, something some customers find distracting. The small aesthetic issue goes away with closed shoes or footwear that hides the bolts, which means it's not a reason to stay away from standing feet totally.

Non-Standing Feet: Cheaper and Lighter
Non-standing feet are cheaper and lighter, and they're fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her. Non-standing feet do the job for a bed-or-sofa doll, and what you save can go towards articulated hands, a better wig or comparable upgrades. Nothing mistaken with this choice for purchasers who know what they want; it's completely valid.

No Hard Core Inside
Non-standing feet are marginally softer and more pliable too, and some buyers find that more comfortable to touch. Not usually enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

A Common and Costly Mistake
The big risk with non-standing feet: purchasers forget what kind of feet they have and try to stand the doll regardless. This usual mistake causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. Keep in mind that non-standing feet are non-standing, if that's what you're acquiring, and don't be tempted to test their limits.

If You Might Want Them Later
A further question is whether a doll that doesn't have standing feet can have them retrofitted. The short answer is no, not easily. Adding the bolts after that requires cutting into the feet and installing new hardware, which is costly and often doesn't work as well as the original, because they're embedded in the soles during manufacturing. Thinking of buying a doll without standing feet, but might want them later? Better to purchase a doll with standing feet in the first place than to try to add them later.

Selecting Between Standing and Non-Standing Feet
Deciding between standing and non-standing feet comes with straightforward sensible advice. You need standing feet if you plan to photograph the doll, display her standing, or use her in the shower. If you only want to use her in bed or on a sofa, and you don't care about display, non-standing feet are perfectly adequate. If you're on the fence, go with standing feet, the safer choice, because nothing is ruled out and the small additional cost is worth paying.

Male Dolls Benefit More From Standing Feet
There's a gender consideration as well that's worth mentioning. Male dolls tend to benefit more than female dolls from standing feet, as they're heavier and more challenging to store in any other way. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. With standing feet, male dolls can be stored upright, a genuine benefit for customers who don't have a lot of room.

Barefoot Photography Priorities
To finish, the aesthetic difference between standing and non-standing feet is worth noting. The bottom of standing feet is somewhat harder because of the bolts, something that can be visible when the doll is barefoot. Dolls with fragile features particularly suffer, some customers feel, because the hard soles look marginally industrial and less aesthetically gratifying. More natural-looking and softer are non-standing feet, which some buyers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Tighten With the Appropriate Tool
Consider the maintenance angle too. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Tighten the bolts with the appropriate tool if they feel loose when you check them every few months by gently twisting. In the long run non-standing feet are a little lower-maintenance, since there's no hardware to come loose and so no such issue.

Carpet Grips Well
Distinct surfaces mean different standing behaviour, and the bolts influence it. The bolts grip well on carpet, so the doll is steady. Hard flooring can make the bolts slip, especially if the floor is smooth, so the doll may need additional support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet avoids it. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

More Natural-Looking Without the Bolts
How standing feet affect the doll's overall proportions is a final consideration that's frequently overlooked. Barefoot photos can look a little different because the bolts add a small amount of length to the foot. It's a subtle effect that's usually invisible in shoes, yet worth knowing about for barefoot photography when you care about precise proportions. The feet are a little shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

Select Standing Unless You're Certain
At the end of the day, standing feet are worth the additional cost for most purchasers, as they open up alternatives for posing, display, storage and the shower that non-standing feet don't. The only customers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are better for everyone else, and they're among the simplest upgrades to justify. More info at this rosslink. Also check out extra resources not to mention visit this website not to mention you can try here which is worth considering with reference as well as my blog bearing in mind this hyperlink together with click here for more info on top of anonymous as well as you can try this out and yoururl.com for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]