[FrankJScott]

[center][/center]

[center]DISCOVER BEST SEX DOLL FEET GUIDE NOW[/center]

Standing Feet Or Non-Standing Feet? The Differences Explained
You won't think about standing feet until you need them, and then you'll find the difference is gigantic. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. Before you order, understand the difference, which is one of the simplest ways to steer clear of an annoying purchase.

Why Non-Standing Dolls Can Only Sit or Lie Down
It's a straightforward difference at heart. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. Non-standing feet lack these bolts, meaning the doll can only sit or lie down, with damage to the feet if you attempt to stand her. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Important for Photography and Display
Photography and display are where standing feet are essential. Full-length poses without evident supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the principal reason most photographers specify standing feet when ordering.

Structural Failure From Water Damage
Shower use makes standing feet crucial too. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. The feet don't absorb water the way non-standing feet would, because the metal bolts make sure that, and the standing feet give her stability in a wet environment. A genuine safety consideration is at play here: water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become noticeable but is essentially unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how diligent you are, because the water will find its way in irrespective of your precautions.

When You Lack Room for a Hanging Setup
In some setups, standing feet also make storage easier. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Purchasers who want to display the doll rather than keep her hidden will find this a great option, and it's space-efficient if you don't have room for a hanging setup. The doll can be stored in a way that's apparent and accessible thanks to the standing feet, and some purchasers prefer this.

A More Involved Manufacturing Process
The price you pay for standing feet is that they're slightly more costly and a little heavier. You'll typically pay a few percent more than for non-standing feet, because the metal bolts add a small amount of weight and manufacturing is more involved. Usually worth the extra cost, and small, the difference is still worth knowing about on a very tight budget.

Bolts in Photos
The second downside is that bare feet can show the bolts. Some purchasers are distracted when the bolts are noticeable in photos of a doll in high-heeled shoes or open-toed footwear. Closed shoes or footwear that conceals the bolts solve this minor aesthetic issue, so it's not a reason to steer clear of standing feet entirely.

Perfectly Adequate for Many Buyers
For buyers who only want to use the doll in bed, with no plans to display her standing or shower with her, non-standing feet are cheaper, lighter and fine. Non-standing feet do the job for a bed-or-sofa doll, and what you save can go towards articulated hands, a better wig or comparable upgrades. If you know what you want, this is a totally valid choice.

Softness as a Selling Point
Comfort to the touch is another point: non-standing feet are slightly softer and more pliable, which some customers prefer. The difference is subtle and not normally enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Foam in the Ankle Can't Take the Weight
Forgetting what kind of feet they have, buyers try to stand the doll anyway, and that's the large risk with non-standing feet. Why is this widespread error so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. Because the feet have been permanently damaged, the result is a doll that can no longer stand even if you attempt to support her. Don't be tempted to test their limits if you're purchasing non-standing feet; remember that they're non-standing.

Decide Before You Order
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. In short, no, not readily. Embedded in the soles during manufacturing, the bolts can only be added later by cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original. When you think you might want standing feet later and you're considering a doll without them, it's better to purchase a doll with standing feet first than try to add them later.

A Simple Decision Guide
There's straightforward sensible advice for buyers selecting between standing and non-standing feet. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. Non-standing feet will do perfectly well if you only want to use her in bed or on a sofa and don't care about display. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small extra cost is worth it.

Heavier Dolls Are Harder to Store
Gender plays a part too, and it's worth mentioning. Ordinarily, standing feet upside male dolls more than female dolls, because male dolls are heavier and more tricky to store in any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Storing upright becomes possible for male dolls with standing feet, a genuine benefit if you don't have a lot of room.

Noticeable Hardness at the Bottom
To finish, the aesthetic difference between standing and non-standing feet is worth noting. The bolts make standing feet somewhat harder at the bottom, and this can be evident when the doll is barefoot. The look of the hard soles is marginally industrial, and some customers find that less aesthetically satisfying, especially on dolls with fragile features. Preferred by some customers, non-standing feet are softer and more natural-looking. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
Consider the maintenance angle too. Why check periodically? A loose bolt can damage the foot or the ankle, and if one falls out completely the doll can collapse. Check every few months, by gently twisting the bolts, and tighten with the fitting tool whichever feel loose. Non-standing feet escape this issue because there's no hardware to come loose, which makes them a little lower-maintenance long term.

Stability Depends on the Surface
How well the doll stands on different surfaces depends in part on the bolts. The bolts grip well on carpet, so the doll is steady. The doll may need extra support to stay upright when the bolts slip on hard flooring, particularly a smooth floor. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to prevent sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

Bolts Add a Little Length to the Foot
A final, often overlooked, consideration is the effect of standing feet on the doll's overall proportions. The foot gets a small quantity of additional length from the bolts, and that can marginally change the way the doll looks in barefoot photos. This is a subtle effect, and it's usually invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. The feet are a little shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

The Bottom Line: Standing Feet Are Worth It
Posing, display, storage and shower options that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the additional cost for most customers. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. For the rest of buyers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this A Candid Guide to Sex Dolls- The Real Talk 5c03_fd not forgetting sites such as A Quick Word on Modern Sex Dolls- Start Here and Your Ultimate Rundown of Sex Dolls Right Now- What You Need to Know. Also check out continue reading for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]