[FrankJScott]

[center][/center]

[center]DISCOVER THE BEST SEX DOLL FEET ADVICE TODAY[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Think of standing feet as a feature nobody considers until they need it, when the difference proves enormous. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Before you order, comprehend the difference, which is one of the simplest ways to steer clear of an annoying purchase.

Metal Bolts Embedded in the Soles
There's an uncomplicated basic difference. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.

Display Possibilities With Standing Feet
When it comes to photography and display, standing feet are essential. A doll that can stand unaided can be photographed in full-length poses without evident supports, and can be displayed in a corner, a doorway, or anywhere else that needs her to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the principal reason most photographers specify standing feet when ordering.

Stability in a Wet Environment
Also essential is standing feet for shower use. Showering with your doll needs her to stand; the alternative, lying her down in a shower, is both impractical and hazardous. The standing feet give her stability in a wet environment, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. A real safety consideration is at play here: water absorption in non-standing feet can lead to rust and eventual structural failure.

Weeks or Months Before the Damage Shows
Because it's the source of a lot of damaged dolls, the shower use point is worth expanding. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become apparent but is essentially unfixable once it starts. No matter how diligent you are, a doll with non-standing feet should never be in the shower; water finds its way in regardless of precautions.

Standing Feet Make Storage Easier
In some setups, standing feet also make storage easier. A doll with standing feet can be stored upright in a corner, a wardrobe, or a storage cabinet without needing a hanging hook or a storage case. Purchasers who want to display the doll rather than keep her hidden will find this a good alternative, and it's space-efficient if you don't have room for a hanging setup. The standing feet make it possible to store the doll in a way that's apparent and accessible, which some customers prefer.

Weight and Price Trade-Offs
A disadvantage of standing feet: they're slightly more expensive and a little heavier. Why the premium? The metal bolts add a small amount of weight to the doll, manufacturing is more involved, and the price typically ends up a few percent higher than a doll with non-standing feet. The difference is small, typically worth the additional cost, and worth knowing about if you're purchasing on an extremely tight budget.

Bolts Showing When the Feet Are Bare
There's another downside: the bolts can become apparent if the feet are bare. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some buyers find this distracting. Because this slight aesthetic issue can be solved by covering the feet with closed shoes or picking footwear that conceals the bolts, it's not a reason to stay away from standing feet totally.

Putting the Savings Elsewhere
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly adequate and leave money for upgrades like articulated hands or a better wig. Totally valid is this choice for customers who know what they want.

Softer, More Flexible Feet
Marginally softer and more pliable, non-standing feet are more comfortable to touch for some buyers. A subtle difference, not usually enough to justify the choice on its own, this is still worth knowing about if you're specifically looking for maximum softness. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.

Permanent Damage to the Feet
The big risk with non-standing feet: buyers forget what kind of feet they have and try to stand the doll in any case. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this widespread error causes genuine damage. The result is a doll that can no longer stand even if you try to support her, because the feet have been permanently damaged. If non-standing feet are what you're acquiring, remember that they're non-standing and don't test their limits.

Purchase Standing Feet in the First Place
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. Not easily; that's the short answer. During manufacturing the bolts are embedded in the soles; doing it after that means cutting into the feet and installing new hardware, which is expensive and regularly doesn't work as well as the original. Acquire a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.

Picking Between Standing and Non-Standing Feet
For purchasers who are picking between standing and non-standing feet, the sensible advice is uncomplicated. For photographing the doll, displaying her standing, or using her in the shower, you need standing feet. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly sufficient. For the uncertain, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small extra cost.

Weight and Storage Together
There's a gender consideration as well that's worth mentioning. Because they're heavier and more tricky to store in any other way, male dolls ordinarily upside from standing feet more than female dolls. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Customers who don't have a lot of room get a genuine advantage from standing feet, which give male dolls the ability to store upright.

A Trade-Off That Matters for Barefoot Photos
There's a final note to make on the aesthetic difference between standing and non-standing feet. The bottom of standing feet is slightly harder because of the bolts, something that can be noticeable when the doll is barefoot. Dolls with delicate features notably suffer, some buyers feel, because the hard soles look a little industrial and less aesthetically satisfying. Softer and more natural-looking, non-standing feet are preferred by some customers. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Check Every Few Months by Gently Twisting
There's a maintenance angle as well that's worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out totally can cause the doll to collapse. Check every few months, by gently twisting the bolts, and tighten with the suitable tool whichever feel loose. With no hardware to come loose, non-standing feet steer clear of this issue and are a little lower-maintenance in the long run.

Hard Flooring Can Be Slippery
Distinct surfaces mean different standing behaviour, and the bolts influence it. The doll is constant on carpet, where the bolts grip well. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, particularly if the floor is silky. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it prevents sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

Non-Standing Feet Are Slightly Shorter
One final consideration, often overlooked, is how standing feet affect the doll's overall proportions. Adding a small quantity of length to the foot, the bolts can somewhat change the way the doll looks in barefoot photos. This is a subtle effect, and it's typically invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. No bolts means no such effect with non-standing feet, whose feet are slightly shorter and more natural-looking.

What Standing Feet Open Up
The bottom line is that standing feet are worth the additional cost for most buyers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. Who can skip them? Purchasers who are certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out get more info alongside all take a look at the site here not to mention more bonuses on top of his comment is here on top of go to this web-site as well as more info not to mention go to the website and don't forget continue reading together with discover this info here and yoururl.com for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]