[FrankJScott]

[center][/center]

[center]SEE THE BEST SEX DOLL FEET ADVICE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Think of standing feet as a feature nobody considers until they need it, when the difference proves enormous. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. Grasp the difference before ordering and you'll have stayed away from an irritating purchase in one of the simplest ways possible.

Metal Bolts Embedded in the Soles
Boiled down, the difference is uncomplicated. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Full-Length Poses Without Visible Supports
You need standing feet for photography and display. Anywhere that requires her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without visible supports. Most photographers specify standing feet when ordering for this chief reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.

A Real Safety Consideration
Standing feet are crucial for the shower as well. For showering with your doll, standing ability is a requirement; lying her down in a shower is both impractical and unsafe. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. The genuine safety consideration is that water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become visible but is basically unfixable once it starts. Because the water will find its way in anyway of your precautions, a doll with non-standing feet should never be in the shower, no matter how careful you are.

When You Lack Room for a Hanging Setup
Storage is easier with standing feet in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Buyers who don't have room for a hanging setup will find this a space-efficient choice, and it suits buyers who want to display the doll rather than keep her hidden. Noticeable and accessible storage is made possible by the standing feet, which some buyers prefer.

What Standing Feet Cost
Their downside is simply being marginally more pricey and somewhat heavier. A few percent additional on the price is typical compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. The difference is small, generally worth the additional cost, and worth knowing about if you're acquiring on an incredibly tight budget.

A Minor Aesthetic Issue
Another drawback is that the bolts can become noticeable if the feet are bare. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some buyers find this distracting. No reason to avoid standing feet completely, since this small aesthetic issue can be solved with closed shoes or footwear that conceals the bolts.

When Standing Feet Aren't Needed
Buyers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. For a doll that's going to spend most of her life in a bed or on a sofa, non-standing feet are perfectly sufficient, and the savings can go towards other upgrades like articulated hands or a better wig. A totally valid choice, this, for customers who know what they want.

Softness as a Selling Point
More comfortable to touch, for some purchasers, are non-standing feet, which are slightly softer and more adaptable. Specifically looking for maximum softness? Then this subtle difference, though not generally enough to justify the choice on its own, is worth knowing about. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Trying to Stand the Doll Anyway
The large risk with non-standing feet is that purchasers forget what kind of feet they have and try to stand the doll anyway. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a usual error. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're buying them, and don't be tempted to test their limits.

Cutting Into the Feet Is Expensive and Risky
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. No, not readily, is the short answer. Cutting into the feet and installing new hardware is what adding the bolts subsequently requires, which is pricey and frequently doesn't work as well as the original; the bolts are embedded in the soles during manufacturing. Considering a doll without standing feet, and think you might want them later? Acquire a doll with standing feet in the first place; it's better than trying to add them later.

Bed or Sofa Only: Non-Standing Is Fine
The functional advice for buyers selecting between standing and non-standing feet is straightforward. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. When you only want to use her in bed or on a sofa, and display doesn't matter to you, non-standing feet are perfectly adequate. When in doubt, standing feet win, since they leave every option open and cost only a little more.

A Gender Consideration
Worth mentioning, too, is a gender consideration. More than female dolls, male dolls normally upside from standing feet, being heavier and more difficult to store in any other way. More space and pressure on the body are what a 45kg male doll that can't stand costs you, as he has to be stored lying down. A genuine benefit for purchasers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

A Final Note on Appearance
To finish, the aesthetic difference between standing and non-standing feet is worth noting. On standing feet the bottom is slightly harder thanks to the bolts, and that can show when the doll is barefoot. Some purchasers consider it less aesthetically satisfying, particularly with delicate features, because of the marginally industrial look of the hard soles. Softness and a natural look are what non-standing feet offer, and some purchasers prefer them. If barefoot photos are a priority, factor this trade-off into your decision; it only matters if you're photographing the doll barefoot.

The Maintenance Angle
Consider the maintenance angle too. Standing feet aren't a fit-and-forget feature; check the bolts periodically, as a loose bolt can damage the foot or the ankle and a bolt that drops out totally can cause the doll to collapse. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. Non-standing feet escape this issue because there's no hardware to come loose, which makes them a little lower-maintenance long term.

Grip and Stability
Another effect of the bolts is on how the doll stands on distinct surfaces. Carpet suits the bolts, which grip well, leaving the doll constant. The doll may need additional support to stay upright on hard flooring, where the bolts can slip, especially if the floor is silky. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

Bolts Add a Little Length to the Foot
The doll's overall proportions are affected by standing feet, a final consideration that's often overlooked. Barefoot photos can look marginally distinct because the bolts add a small quantity of length to the foot. Normally invisible in shoes, this subtle effect is worth knowing about if you're planning to photograph the doll barefoot and you care about exact proportions. The feet are slightly shorter and more natural-looking on non-standing feet, which don't have this effect because they don't have the bolts.

The Bottom Line: Standing Feet Are Worth It
Posing, display, storage and shower options that non-standing feet don't offer are opened up by standing feet, and the bottom line is that they're worth the additional cost for most buyers. Only customers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this The No-Nonsense Lowdown on Sex Dolls Right Now- What to Expect ae8781e together with A Brutally Honest Look at Sex Dolls- Read Before You Buy which is worth considering with A Quick Guide to Sex Dolls Today- Start Here alongside all A Candid Lowdown on Sex Dolls Right Now- The Real Talk bearing in mind A Candid Lowdown on Modern Sex Dolls- Before You Spend a Penny not forgetting sites such as A Candid Lowdown on Sex Dolls- The Honest Breakdown together with The Essential Overview of Sex Dolls Right Now- What You Need to Know on top of The Full Look at Sex Dolls Right Now- What Nobody Tells You and don't forget The Only Overview of Sex Dolls Today- What to Expect and Your Ultimate Deep Dive Into Modern Sex Dolls- Start Here. Also check out view for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]