[FrankJScott]

[center][/center]

[center]CLICK FOR BEST SEX DOLL FEET GUIDE TODAY[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
It's only when purchasers need standing feet that they notice them, and the difference is immense. Everything from what you can do with the doll to how she stores, photographs and wears over time shifts because of this small detail on the spec sheet. Understanding the difference before you order is one of the simplest ways to steer clear of an annoying purchase.

Bolts or No Bolts
At its most basic, the difference is uncomplicated. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. Whether the bolts are present decides everything else; they're the key.

The Photographer's Choice
Essential for photography and display: standing feet. A doll that can stand unaided can be photographed in full-length poses without apparent supports, and can be displayed in a corner, a doorway, or anywhere else that requires her to be upright. Poses and settings in a wide range become possible, which non-standing feet rule out, and most photographers specify standing feet when ordering for precisely that reason.

Structural Failure From Water Damage
For shower use too, standing feet are necessary. Lying her down in a shower is impractical and hazardous, so showering with your doll means she needs to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

The Source of a Lot of Damaged Dolls
The shower use point needs expanding, since so many damaged dolls are down to it. Water gets absorbed by the foam or filler material inside the ankle of non-standing feet when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is fundamentally unfixable, though it takes weeks or months to become apparent. Nonetheless cautious you are, keep a doll with non-standing feet out of the shower, because the water will find its way in anyway of your precautions.

Display Rather Than Hide
Storage is easier with standing feet in some setups. Standing feet let you store the doll upright in a corner, a wardrobe, or a storage cabinet, without a hanging hook or a storage case. Purchasers who don't have room for a hanging setup will find this a space-efficient choice, and it suits buyers who want to display the doll rather than keep her hidden. Some purchasers prefer that the standing feet make it possible to store the doll in a way that's evident and accessible.

Small Difference, Usually Worth It
On the disadvantage, standing feet are slightly more pricey and somewhat heavier. Metal bolts add a small amount of weight to the doll. Manufacturing is also more involved. The upshot is a cost that's ordinarily a few percent higher than a doll with non-standing feet. For purchasers on a very tight budget it's worth knowing about, even though the difference is small and it's typically worth the additional cost.

Not a Reason to Avoid Standing Feet
A further downside is the bolts becoming visible if the feet are bare. On a doll with high-heeled shoes or open-toed footwear, the bolts might be visible in photos, which some purchasers find distracting. Because this slight aesthetic issue can be solved by covering the feet with closed shoes or choosing footwear that conceals the bolts, it's not a reason to avoid standing feet entirely.

Fine for Bed-Only Dolls
Non-standing feet are cheaper and lighter, and they're fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her. For a doll who'll chiefly be on a bed or sofa, perfectly adequate non-standing feet free up cash for other upgrades, such as articulated hands or a better wig. Purchasers who know what they want can make this choice totally validly.

Comfortable to Touch
Marginally softer and more flexible, non-standing feet are more comfortable to touch for some purchasers. This is a subtle difference, and it's not usually enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. Non-standing dolls' feet feel like the rest of the doll more than like they have a hard core inside them.

Tearing and Collapse
It's the forgetful purchaser who trips up on non-standing feet, attempting to stand the doll anyway; that's the sizable risk. Why is this usual oversight so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. Don't be tempted to test their limits if you're buying non-standing feet; remember that they're non-standing.

Cutting Into the Feet Is Expensive and Risky
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. Short answer: no, not readily. Embedded in the soles during manufacturing, the bolts can only be added afterwards by cutting into the feet and installing new hardware, which is expensive and often doesn't work as well as the original. Thinking of buying a doll without standing feet, but might want them later? Better to acquire a doll with standing feet in the first place than to try to add them later.

Bed or Sofa Only: Non-Standing Is Fine
Purchasers selecting between standing and non-standing feet can follow some direct sensible advice. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly adequate. If you're on the fence, go with standing feet, the safer alternative, because nothing is ruled out and the small extra cost is worth paying.

Heavier Dolls Are Harder to Store
Another consideration worth mentioning concerns gender. Because male dolls are heavier and more difficult to store in any other way, they usually get more from standing feet than female dolls do. A 45kg male doll that can't stand has to be stored lying down, and that puts pressure on the body and requires more space. The ability to store upright is given to male dolls by standing feet, and that's a genuine advantage for customers who don't have a lot of room.

Harder Soles Because of the Bolts
Worth a final note is the aesthetic difference between standing and non-standing feet. Marginally harder at the bottom is how standing feet are, because of the bolts, and it can be apparent when the doll is barefoot. Some customers consider it less aesthetically gratifying, notably with delicate features, because of the marginally industrial look of the hard soles. Some customers prefer non-standing feet, which are softer and more natural-looking. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.

Check Every Few Months by Gently Twisting
A maintenance angle is also worth considering. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out totally can make the doll collapse. Check every few months, by gently twisting the bolts, and tighten with the suitable tool whichever feel loose. There's no hardware to come loose with non-standing feet, so they don't have this issue and are slightly lower-maintenance in the long run.

A Small Mat or Grippy Pad
How the doll stands on different surfaces is also affected by the bolts. With carpet, the bolts grip well and the doll is stable. On hard flooring, the bolts can slip, particularly if the floor is smooth, and the doll may need additional support to stay upright. Think about a small mat or a grippy pad under the feet when she's on a hard surface, as it prevents sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

More Natural-Looking Without the Bolts
One final consideration, often overlooked, is how standing feet affect the doll's overall proportions. The foot gets a small amount of additional length from the bolts, and that can marginally change the way the doll looks in barefoot photos. It's a subtle effect that's typically invisible in shoes, yet worth knowing about for barefoot photography when you care about exact proportions. With non-standing feet there are no bolts, so no such effect, and the feet are a little shorter and more natural-looking.

Final Verdict on Feet
Standing feet are worth the additional cost for most purchasers, which is the bottom line, because they open up posing, display, storage and shower options that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this A No-BS Deep Dive Into Sex Dolls- What You Need to Know 342cae8 not forgetting sites such as Your Ultimate Deep Dive Into Modern Sex Dolls- What You Need to Know together with A Brutally Honest Overview of Sex Dolls Today- The Truth bearing in mind The No-Nonsense Breakdown of Sex Dolls Right Now- What to Expect together with A Brutally Honest Overview of Modern Sex Dolls- The Real Talk and don't forget Your Ultimate Rundown of Sex Dolls Today- What Actually Matters not to mention A No-BS Rundown of Modern Sex Dolls- No Hype Just Facts bearing in mind The No-Nonsense Guide to Sex Dolls Today- What Actually Matters alongside all An Honest Word on Sex Dolls Today- Read Before You Buy and A Straight-Up Guide to Modern Sex Dolls- What Actually Matters. Also check out click to read more as well as find and discover this for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]