[FrankJScott]

[center][/center]

[center]CLICK HERE FOR THE BEST SEX DOLL FEET ADVICE NOW[/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Standing feet are one of those features that buyers don't think about until they need them, and then they discover the difference is gigantic. Everything from what you can do with the doll to how she stores, photographs and wears over time shifts because of this small detail on the spec sheet. If you understand the difference before you order, you've evaded a frustrating purchase in one of the simplest ways there is.

Everything Follows From the Bolts
It's an uncomplicated difference at heart. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Are the bolts there or not? That's the key, and everything else follows from it.

Upright Without Props
For photography and display, standing feet are essential. A doll who can stand unaided can be photographed in full-length poses without apparent supports and displayed in a corner, a doorway, or wherever else she needs to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the primary reason most photographers specify standing feet when ordering.

If You Want to Shower With Your Doll
If you want shower use, standing feet are crucial as well. She needs to stand if the plan is a shower together, because a doll lying down in a shower is impractical and risky. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. Rust and eventual structural failure can follow from water absorption in non-standing feet, which makes this a real safety consideration.

The Source of a Lot of Damaged Dolls
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become visible but is essentially unfixable once it starts. The water will find its way in regardless of your precautions, so a doll with non-standing feet should never be in the shower, no matter how careful you are.

When You Lack Room for a Hanging Setup
In some setups, standing feet also make storage easier. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a good choice. Standing feet make evident and accessible storage possible, which suits some buyers best.

Metal Bolts Add Weight
Their drawback is simply being somewhat more expensive and slightly heavier. Marginally more weight comes from the metal bolts, and the more involved manufacturing process pushes the cost normally a few percent above a doll with non-standing feet. The difference is small, typically worth the extra cost, and worth knowing about if you're purchasing on an extremely tight budget.

Bolts in Photos
If the feet are bare, the bolts can become evident; that's the other downside. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be visible in photos, which some purchasers find distracting. You can solve this slight aesthetic issue by covering the feet with closed shoes or opting for footwear that hides the bolts, so don't stay away from standing feet totally because of it.

The Case for Non-Standing Feet
Fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly adequate for a doll who largely lives in a bed or on a sofa. Where customers know what they want, this is a totally valid choice.

A Subtle Difference
Non-standing feet are somewhat softer and more flexible too, and some buyers find that more comfortable to touch. On its own this subtle difference doesn't typically justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

A Common and Costly Mistake
With non-standing feet the big risk is buyers forgetting what kind of feet they have, then trying to stand the doll in any case. Tear or collapse is what the foam inside the ankle does under the doll's weight, which is why this common oversight causes genuine damage. A doll that can no longer stand, even if you try to support her, is the result, because the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're acquiring them, and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
You might also ask whether standing feet can be retrofitted to a doll that doesn't have them. Briefly: no, and definitely not readily. Embedded in the soles during manufacturing, the bolts can only be added subsequently by cutting into the feet and installing new hardware, which is costly and often doesn't work as well as the original. Better than trying to add them later is acquiring a doll with standing feet in the first place, if you're considering a doll without them and think you might want them later.

Useful Advice by Use Case
When picking between standing and non-standing feet, the useful advice is straightforward. Photographing the doll, displaying her standing, or utilising her in the shower? Then you need standing feet. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly adequate. The safer pick when you're is standing feet; they limit nothing, and the small additional cost is worth it.

Weight and Storage Together
Another consideration worth mentioning concerns gender. Standing feet advantage male dolls more than female dolls in general, as they're heavier and harder to store any other way. There's no option but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and needs more space. Male dolls can store upright with standing feet, which is a real upside for buyers who don't have a lot of room.

Industrial-Looking Soles on Delicate Dolls
One final note: the aesthetic difference between standing and non-standing feet. With the doll barefoot, the marginally harder bottom of standing feet, down to the bolts, can be visible. Some customers find this less aesthetically satisfying, particularly on dolls with fragile features, because the hard soles look slightly industrial. Non-standing feet are more natural-looking and softer, something some buyers prefer. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

A Bolt That Falls Out Can Make the Doll Collapse
Another angle worth considering is maintenance. Bolt security on standing feet needs checking from time to time; a loose one risks the foot or ankle, and a missing one risks the doll collapsing. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the suitable tool. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're slightly lower-maintenance in the long run.

Hard Flooring Can Be Slippery
The bolts also influence how the doll stands on distinct surfaces. Carpet suits the bolts, which grip well, leaving the doll stable. The doll may need extra support to stay upright when the bolts slip on hard flooring, especially a smooth floor. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it stops sliding. Non-standing feet don't have this issue, because the doll isn't standing in the first place, but if you're planning to display a doll with standing feet on a hard floor, this is worth knowing about.

Ordinarily Invisible in Shoes
Frequently overlooked, there's a final consideration in how standing feet influence the doll's overall proportions. Adding a small amount of length to the foot, the bolts can marginally change the way the doll looks in barefoot photos. You probably won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about precise proportions. Because they don't have the bolts, non-standing feet don't have this effect, and so are a little shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
The additional cost of standing feet is worth it for most customers, because they open up posing, display, storage and shower alternatives that non-standing feet don't; that's the bottom line. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this A Brutally Honest Look at Sex Dolls Today- What Actually Matters a9fb5c0 and don't forget A Straight-Up Breakdown of Sex Dolls- Before You Spend a Penny and A Candid Overview of Modern Sex Dolls- The Truth. Also check out pop over here for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]