[FrankJScott]

[center][/center]

[center]DISCOVER THE BEST SEX DOLL FEET ADVICE NOW[/center]

Standing Feet Vs Non-Standing Feet: What The Difference Means
Standing feet go unconsidered until they're needed, at which point purchasers discover the difference is huge. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. An annoying purchase can be evaded in one of the simplest ways: grasp the difference before you order.

The Bolts Are the Key
It's an uncomplicated difference at heart. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only permit sitting or lying down. Whether the bolts are present decides everything else; they're the key.

Standing Unaided
Necessary for photography and display: standing feet. Photographed in full-length poses without evident supports, and displayed in a corner, a doorway or anywhere else that needs her upright: that's what a doll that can stand unaided can do. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the chief reason most photographers specify standing feet when ordering.

A Real Safety Consideration
If you want shower use, standing feet are essential as well. A shower with your doll only works if she can stand, as lying her down in one is both impractical and risky. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a real safety consideration.

Never Shower a Non-Standing Doll
A lot of damaged dolls come from shower use, so the point is worth expanding. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become noticeable and being basically unfixable once it starts. Nonetheless diligent you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Space-Efficient Storage
Easier storage is another thing standing feet offer in some setups. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a solid alternative. The standing feet make it possible to store the doll in a way that's evident and accessible, which some purchasers prefer.

A Few Percent More Expensive
It's a downside that standing feet are somewhat more pricey and marginally heavier. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. The additional cost is usually worth it and the difference is small, but an incredibly tight budget makes it worth knowing about.

The Other Disadvantage: Visible Bolts
The other disadvantage is that the bolts can become evident if the feet are bare. Some customers find it distracting that the bolts might be apparent in photos on a doll with high-heeled shoes or open-toed footwear. The small aesthetic issue goes away with closed shoes or footwear that hides the bolts, which means it's not a reason to avoid standing feet entirely.

When Standing Feet Aren't Needed
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Non-standing feet are perfectly enough if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. Where purchasers know what they want, this is a totally valid choice.

Maximum Softness
Some buyers find non-standing feet more comfortable to touch, being a little softer and more elastic. If you're specifically looking for maximum softness it's worth knowing about, even though this is a subtle difference that's not typically enough to justify the choice on its own. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

A Common and Costly Mistake
Forgetting what kind of feet they have, buyers try to stand the doll regardless, and that's the huge risk with non-standing feet. Why is this usual oversight so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. What results is a doll that can't stand any more even with support, as the feet have been permanently damaged. When you buy non-standing feet, remember what they are and don't be tempted to test their limits.

Bolts Are Embedded During Manufacturing
Can standing feet be retrofitted to a doll that doesn't have them? That's a question too. No, not easily, is the short answer. Adding the bolts subsequently requires cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original, because they're embedded in the soles during manufacturing. Thinking of acquiring a doll without standing feet, but might want them later? Better to purchase a doll with standing feet in the first place than to attempt to add them later.

Photography, Display or Shower: You Need Standing Feet
Deciding between standing and non-standing feet comes with direct functional advice. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. Perfectly adequate are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. The safer choose when you're is standing feet; they limit nothing, and the small additional cost is worth it.

Room for Storage Is a Real Concern
Worth mentioning, too, is a gender consideration. Because they're heavier and more hard to store in any other way, male dolls broadly advantage from standing feet more than female dolls. Stored lying down, which puts pressure on the body and requires more space, is how a 45kg male doll that can't stand has to be kept. With standing feet, male dolls can be stored upright, a genuine upside for customers who don't have a lot of room.

The Aesthetic Difference
To finish, the aesthetic difference between standing and non-standing feet is worth noting. The bottom of standing feet is slightly harder because of the bolts, something that can be evident when the doll is barefoot. The look of the hard soles is a little industrial, and some customers find that less aesthetically pleasing, particularly on dolls with fragile features. Non-standing feet are more natural-looking and softer, something some customers prefer. For barefoot photos as a priority, factor this trade-off into your decision; otherwise, it only matters if you're photographing the doll barefoot.

A Loose Bolt Can Damage the Foot or Ankle
A maintenance angle is also worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. There's no hardware to come loose with non-standing feet, so they don't have this issue and are a little lower-maintenance in the long run.

A Small Mat or Grippy Pad
The bolts have an effect, too, on how the doll stands on distinct surfaces. On carpet, the doll is constant, the bolts gripping well. Additional support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. Hard surface under the feet? Consider a small mat or a grippy pad to prevent sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

An Overlooked Detail: Proportions
A final consideration is often overlooked: how standing feet influence the doll's overall proportions. Barefoot photos can look a little different because the bolts add a small amount of length to the foot. This subtle effect, typically invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. No bolts means no such effect with non-standing feet, whose feet are somewhat shorter and more natural-looking.

Opt for Standing Unless You're Certain
Bottom line: for most buyers standing feet are worth the extra cost, opening up posing, display, storage and shower options that non-standing feet don't. Who can skip them? Buyers who are certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this The Essential Overview of Sex Dolls- The Truth 8bd9924 as well as Your Ultimate Overview of Sex Dolls Right Now- The Stuff That Matters and An Honest Primer on Sex Dolls Right Now- The Real Talk. Also check out my blog not forgetting sites such as hop over to this website not to mention find out this here which is worth considering with look at here on top of my latest blog post not forgetting sites such as click over here and don't forget get more information not to mention visit our website on top of visit website and take a look at the site here for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]