[FrankJScott]

[center][/center]

[center]SEE THE BEST SEX DOLL FEET ADVICE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained For Sex Doll Buyers
Think of standing feet as a feature nobody thinks about until they need it, when the difference proves enormous. Don't let the spec sheet fool you; this small detail changes what you can do with the doll, how she stores, how she photographs, and how she wears over time. One of the simplest ways to avoid an annoying purchase is to grasp the difference before you order.

Attempting to Stand Her Will Damage the Feet
The basic difference couldn't be simpler. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. These bolts are absent from non-standing feet, so the doll can only sit or lie down, and attempting to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

A Wider Range of Poses and Settings
For photography and display, standing feet are crucial. Unaided standing means full-length poses without evident supports, and display in a corner, a doorway, or anywhere else that requires her to be upright. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the principal reason most photographers specify standing feet when ordering.

Stability in a Wet Environment
Showering is another case where standing feet are vital. A shower with your doll only works if she can stand, as lying her down in one is both impractical and unsafe. The metal bolts make sure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a real safety consideration.

Water Will Find Its Way In
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Inside the ankle of non-standing feet there's foam or filler material that absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become evident but is basically unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how diligent you are, because the water will find its way in regardless of your precautions.

When You Lack Room for a Hanging Setup
Another advantage of standing feet is easier storage in some setups. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. A great alternative for customers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. With the standing feet, the doll can be stored visibly and accessibly, which some buyers prefer.

Small Difference, Usually Worth It
The cost you pay for standing feet is that they're marginally more expensive and marginally heavier. Slightly more weight comes from the metal bolts, and the more involved manufacturing process pushes the price normally a few percent above a doll with non-standing feet. Buying on a really tight budget? The difference is small and normally worth the extra cost, but it's worth knowing about.

Not a Reason to Avoid Standing Feet
Another downside is that the bolts can become visible if the feet are bare. The bolts might be noticeable in photos on a doll with high-heeled shoes or open-toed footwear, and some purchasers find that distracting. Because this trivial aesthetic issue can be solved by covering the feet with closed shoes or picking footwear that conceals the bolts, it's not a reason to avoid standing feet entirely.

Putting the Savings Elsewhere
Cheaper and lighter, non-standing feet do the job for anyone who only wants to use the doll in bed and doesn't plan to display her standing or shower with her. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly acceptable for a doll who largely lives in a bed or on a sofa. Nothing incorrect with this choice for customers who know what they want; it's totally valid.

The Tactile Side of Non-Standing Feet
The softer, more pliable feel of non-standing feet, minor as it is, is more comfortable to touch for some customers. It's worth knowing about if you're specifically looking for maximum softness, though this is a subtle difference and not ordinarily enough to justify the choice on its own. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Tearing and Collapse
With non-standing feet the large risk is buyers forgetting what kind of feet they have, then trying to stand the doll regardless. This typical oversight causes real damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. You end up with a doll that can no longer stand even with your support, since the feet have been permanently damaged. You're purchasing non-standing feet? Remember it, and don't be tempted to test their limits.

Decide Before You Order
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. Short answer: no, not readily. During manufacturing the bolts are embedded in the soles; doing it subsequently means cutting into the feet and installing new hardware, which is expensive and regularly doesn't work as well as the original. When you think you might want standing feet later and you're considering a doll without them, it's better to acquire a doll with standing feet first than try to add them later.

Functional Advice by Use Case
Deciding between standing and non-standing feet comes with straightforward useful advice. Photographing the doll, displaying her standing, or employing her in the shower? Then you need standing feet. Non-standing feet will do perfectly well if you only want to use her in bed or on a sofa and don't care about display. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small additional cost is worth it.

Upright Storage for Male Dolls
Gender plays a part too, and it's worth mentioning. Ordinarily, standing feet advantage male dolls more than female dolls, because male dolls are heavier and more tough to store in any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. It's a real advantage for buyers who don't have a lot of room that standing feet let male dolls store upright.

Barefoot Photography Priorities
Standing and non-standing feet differ aesthetically, which is worth a final note. The bottom of standing feet is slightly harder because of the bolts, something that can be noticeable when the doll is barefoot. Less aesthetically satisfying, to some buyers, is this, especially on dolls with delicate features, as the hard soles look somewhat industrial. Non-standing feet are softer and more natural-looking, which some purchasers prefer. A trade-off that matters only when photographing the doll barefoot, this is worth factoring into your decision if barefoot photos are a priority.

Non-Standing Feet Are Lower-Maintenance
There's a maintenance angle as well that's worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the suitable tool. Non-standing feet escape this issue because there's no hardware to come loose, which makes them marginally lower-maintenance long term.

Preventing Sliding
Distinct surfaces change how the doll stands, thanks to the bolts. Carpet suits the bolts, which grip well, leaving the doll steady. Slipping bolts on hard flooring, particularly if the floor is silky, can mean the doll needs additional support to stay upright. On a hard surface, consider employing a small mat or a grippy pad under the feet to prevent sliding. The doll isn't standing in the first place with non-standing feet, so there's no issue there; with standing feet on a hard floor, it's worth knowing about.

Non-Standing Feet Are Slightly Shorter
Frequently overlooked, there's a final consideration in how standing feet influence the doll's overall proportions. The foot gets a small amount of extra length from the bolts, and that can somewhat change the way the doll looks in barefoot photos. This is a subtle effect, and it's ordinarily invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. Somewhat shorter and more natural-looking, non-standing feet don't have this effect, since they don't have the bolts.

The Bottom Line: Standing Feet Are Worth It
Bottom line: for most customers standing feet are worth the additional cost, opening up posing, display, storage and shower choices that non-standing feet don't. The exception is the customer who's certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this rosslink. Also check out check out here for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]