[FrankJScott]

[center][/center]

[center]DISCOVER BEST SEX DOLL FEET ADVICE NOW[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Think of standing feet as a feature nobody considers until they need it, when the difference proves huge. What you can do with her, how she stores, how she photographs and how she wears over time: a small spec sheet detail changes all of it. To avoid a frustrating purchase, grasp the difference before you order; it's one of the simplest ways.

Why Non-Standing Dolls Can Only Sit or Lie Down
The difference comes down to something simple. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. Damage to the feet is the result of attempting to stand a doll with non-standing feet, which don't have these bolts and so only allow sitting or lying down. Having the bolts or not is the key, and everything else follows from that.

Why Photographers Specify Standing Feet
It's standing feet that photography and display can't do without. Standing unaided, she can be photographed in full-length poses without apparent supports, and displayed in a corner, a doorway, or any other spot that needs her to be upright. It opens up a wide range of poses and settings that aren't possible with non-standing feet, which is why most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
Showering is another case where standing feet are important. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and risky. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a genuine safety consideration.

Foam or Filler Inside the Ankle
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Foam or filler material absorbs water when it gets wet, and non-standing feet have that material inside the ankle. Water rusting the metal skeleton inside the leg takes weeks or months to become evident, yet once it starts it's essentially unfixable. Never put a doll with non-standing feet in the shower, nonetheless attentive you are, since the water will find its way in anyway of your precautions.

When You Lack Room for a Hanging Setup
Standing feet can make storage easier as well, depending on the setup. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. A good choice for buyers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. Standing feet permit storage that's noticeable and accessible, something some customers prefer.

Metal Bolts Add Weight
The drawback of standing feet is that they're marginally more pricey and a little heavier. A few percent additional on the cost is normal compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. For customers on an incredibly tight budget it's worth knowing about, even though the difference is small and it's ordinarily worth the additional cost.

The Other Disadvantage: Apparent Bolts
Bare feet can make the bolts visible, which is the other downside. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some purchasers find distracting. Closed shoes or footwear that conceals the bolts solve this trivial aesthetic issue, so it's not a reason to avoid standing feet completely.

Putting the Savings Elsewhere
You don't need standing feet if you only want to use the doll in bed and don't plan to display her standing or shower with her; non-standing feet are cheaper and lighter. Articulated hands or a better wig could be paid for with the savings, and non-standing feet are perfectly acceptable for a doll who chiefly lives in a bed or on a sofa. Nothing incorrect with this choice for customers who know what they want; it's totally valid.

Comfortable to Touch
Also, non-standing feet are marginally softer and more elastic, something some customers find more comfortable to touch. Specifically looking for maximum softness? Then this subtle difference, though not generally enough to justify the choice on its own, is worth knowing about. The feet on non-standing dolls feel less like they have a hard core inside them, and more like the rest of the doll.

Forgetting What Kind of Feet She Has
The sizable risk with non-standing feet: purchasers forget what kind of feet they have and attempt to stand the doll anyway. Why is this typical slip-up so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. Permanently damaged feet are the cause of a doll that can no longer stand even if you try to support her. Don't be tempted to test their limits if you're acquiring non-standing feet; remember that they're non-standing.

Bolts Are Embedded During Manufacturing
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. No, not readily, is the short answer. New hardware has to be installed by cutting into the feet if you add the bolts subsequently, and it's expensive and regularly doesn't work as well as the original, since the bolts are embedded in the soles during manufacturing. Considering a doll without standing feet, and think you might want them later? Buy a doll with standing feet in the first place; it's better than attempting to add them later.

Standing Feet Don't Limit What You Can Do
Deciding between standing and non-standing feet comes with straightforward practical advice. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. If it's only bed or sofa use you're after, and display is of no concern, non-standing feet are perfectly sufficient. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small additional cost.

Weight and Storage Together
Gender plays a part too, and it's worth mentioning. Because male dolls are heavier and more hard to store in any other way, they usually get more from standing feet than female dolls do. Storage lying down, which puts pressure on the body and needs more space, is the only option for a 45kg male doll that can't stand. A real upside for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

The Aesthetic Difference
Ultimately, the aesthetic difference between standing and non-standing feet is worth noting. The bottom of standing feet is marginally harder because of the bolts, something that can be evident when the doll is barefoot. Dolls with fragile features particularly suffer, some purchasers feel, because the hard soles look somewhat industrial and less aesthetically satisfying. Some buyers prefer non-standing feet, which are softer and more natural-looking. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Tighten With the Appropriate Tool
Worth considering, too, is a maintenance angle. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out entirely can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the fitting tool to tighten them. Somewhat lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

Avoiding Sliding
Standing on distinct surfaces is also affected by the bolts. The doll is stable on carpet because the bolts grip well there. Additional support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. Sliding is prevented on a hard surface by a small mat or a grippy pad under the feet, which you should consider. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

If You Care About Exact Proportions
Last of all, and frequently overlooked, is how standing feet influence the doll's overall proportions. Adding a small amount of length to the foot, the bolts can marginally change the way the doll looks in barefoot photos. This is a subtle effect, and it's ordinarily invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions. This effect isn't present in non-standing feet, as they don't have the bolts, so the feet are a little shorter and more natural-looking.

Posing, Display, Storage and Shower Options
Alternatives for posing, display, storage and the shower are opened up by standing feet, which non-standing feet can't match, making them worth the extra cost for most customers. The only buyers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. For everyone else, standing feet are the better choice, and they're one of the simplest upgrades to justify. More info at this rosslink. Also check out have a look at these guys and don't forget look at this web-site together with read more here alongside all published here not to mention right here not to mention read the article on top of take a look at the site here alongside all get more info as well as my company and you could look here for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]