[FrankJScott]

[center][/center]

[center]VIEW BEST SEX DOLL FEET GUIDE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained: What To Pick And Why
Few purchasers think about standing feet beforehand, yet the difference, once they need them, is enormous. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Get to grips with the difference before you order and you've taken one of the simplest steps towards steering clear of an annoying purchase.

Standing Upright Without Support
The basic difference couldn't be simpler. In standing feet there are metal bolts embedded in the soles, which is how the doll stands upright without support. Because non-standing feet don't have these bolts, the doll can only sit or lie down; trying to stand her damages the feet. The bolts are the key, and everything else follows from whether they're present or not.

Full-Length Poses Without Visible Supports
Standing feet are what photography and display depend on. Full-length poses without visible supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. The main reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Structural Failure From Water Damage
For shower use too, standing feet are critical. Lying her down in a shower is impractical and risky, so showering with your doll means she needs to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

Fundamentally Unfixable Once It Starts
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is basically unfixable, though it takes weeks or months to become noticeable. A doll with non-standing feet should never be in the shower, no matter how cautious you are, because the water will find its way in regardless of your precautions.

No Hanging Hook or Storage Case Needed
There's also easier storage with standing feet in some setups. Stored upright in a corner, a wardrobe or a storage cabinet, a doll with standing feet doesn't need a hanging hook or a storage case. It's a space-efficient alternative for buyers without room for a hanging setup, and a decent one for purchasers who'd rather display the doll than keep her hidden. Storing the doll in a way that's apparent and accessible is possible with standing feet, and some customers prefer that.

A Few Percent More Expensive
The cost you pay for standing feet is that they're marginally more costly and marginally heavier. Few percent higher is the typical price versus a doll with non-standing feet, with the metal bolts adding a small amount of weight and the manufacturing process being more involved. The difference is small, and it's usually worth the extra cost, but it's worth knowing about if you're buying on an extremely tight budget.

Bolts in Photos
The second drawback is that bare feet can show the bolts. High-heeled shoes or open-toed footwear on a doll can leave the bolts visible in photos, which some buyers find distracting. This trivial aesthetic issue is easily solved by covering the feet with closed shoes or by choosing footwear that hides the bolts; it's no reason to stay away from standing feet totally.

When Standing Feet Aren't Needed
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. A doll that lives mostly in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. For purchasers who know what they want, this is an entirely valid choice.

A Subtle Difference
Non-standing feet are slightly softer and more pliable, and some purchasers find them more comfortable to touch as a result. This is a subtle difference, and it's not ordinarily enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Remember They're Non-Standing
The huge risk? Buyers forget what kind of feet they have and attempt to stand the doll in any case. Genuine damage comes of this typical mistake, as the foam inside the ankle can't take the doll's weight and will tear or collapse. Result: permanently damaged feet, and a doll that can no longer stand, even with your support. Remember that non-standing feet are non-standing, if you're acquiring them, and don't be tempted to test their limits.

Adding Bolts Afterwards
Another question is whether standing feet can be retrofitted to a doll that doesn't have them. Not easily; that's the short answer. During manufacturing the bolts are embedded in the soles; doing it later means cutting into the feet and installing new hardware, which is costly and often doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Acquire a doll with standing feet in the first place; it's better than attempting to add them later.

Photography, Display or Shower: You Need Standing Feet
There's straightforward functional advice for purchasers selecting between standing and non-standing feet. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Perfectly acceptable are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. When in doubt, standing feet win, since they leave every option open and cost only a little more.

A Gender Consideration
There's a gender consideration as well that's worth mentioning. Because they're heavier and more tough to store in any other way, male dolls generally benefit from standing feet more than female dolls. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and needs more space. For buyers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a genuine upside.

A Trade-Off That Matters for Barefoot Photos
A last word on the aesthetic difference between standing and non-standing feet is rewarding. On standing feet the bottom is a little harder thanks to the bolts, and that can show when the doll is barefoot. Hard soles look somewhat industrial, which some buyers find less aesthetically gratifying, especially on dolls with delicate features. Non-standing feet are softer and more natural-looking, which some buyers prefer. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

The Maintenance Angle
Consider the maintenance angle too. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out entirely can make the doll collapse. A soft twist of the bolts every few months checks them; if they feel loose, tighten them with the fitting tool. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them marginally lower-maintenance in the long run.

Displaying a Standing Doll on a Hard Floor
Different surfaces change how the doll stands, thanks to the bolts. Grip is solid on carpet, and the doll is steady. Bolts can slip on hard flooring, particularly a silky floor, so the doll may need extra support to stay upright. Hard surface under the feet? Consider a small mat or a grippy pad to avoid sliding. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

An Overlooked Detail: Proportions
Last of all, and frequently overlooked, is how standing feet impact the doll's overall proportions. The foot gets a small amount of additional length from the bolts, and that can marginally change the way the doll looks in barefoot photos. This subtle effect, normally invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about precise proportions. No bolts means no such effect with non-standing feet, whose feet are slightly shorter and more natural-looking.

Pick Standing Unless You're Certain
What it comes down to is that most buyers will find standing feet worth the additional cost, since they open up posing, display, storage, and shower options that non-standing feet don't. Skipping them is for customers certain that bed use is all the doll will get, with no standing display or photography. For the rest of buyers, standing feet are the better choice, and rank among the simplest upgrades to justify. More info at this An Honest Breakdown of Sex Dolls Today- The Real Talk 03342ca as well as The Complete Primer on Modern Sex Dolls- No Hype Just Facts and Your Ultimate Rundown of Sex Dolls Right Now- Before You Spend a Penny. Also check out go to my blog for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]