[FrankJScott]

[center][/center]

[center]DISCOVER THE BEST SEX DOLL FEET ADVICE NOW[/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Few purchasers think about standing feet beforehand, yet the difference, once they need them, is gigantic. Everything from what you can do with the doll to how she stores, photographs and wears over time shifts because of this small detail on the spec sheet. Knowing the difference before you order is among the simplest ways to dodge an irritating purchase.

Bolts or No Bolts
The basic difference is simple. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and attempting to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.

Corners, Doorways and Anywhere Upright
You need standing feet for photography and display. Anywhere that needs her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without evident supports. With standing feet, a wide range of poses and settings opens up that non-standing feet can't match; it's the principal reason most photographers specify them when ordering.

Stability in a Wet Environment
Also vital is standing feet for shower use. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and dangerous. Metal bolts ensure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Genuine safety is at stake, as water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Rusts the Metal Skeleton
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. The water then rusts the metal skeleton inside the leg, which takes weeks or months to become noticeable but is basically unfixable once it starts. Careful or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

Standing Feet Make Storage Easier
There's also easier storage with standing feet in some setups. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a solid one. Standing feet make apparent and accessible storage possible, which suits some buyers best.

Weight and Price Trade-Offs
Standing feet cost marginally more and weigh a little more, and that's the disadvantage. Marginally more weight comes from the metal bolts, and the more involved manufacturing process pushes the price normally a few percent above a doll with non-standing feet. Usually worth the extra cost, and small, the difference is still worth knowing about on an extremely tight budget.

Bolts Showing When the Feet Are Bare
If the feet are bare, the bolts can become noticeable; that's the other downside. Some buyers are distracted when the bolts are visible in photos of a doll in high-heeled shoes or open-toed footwear. You can solve this slight aesthetic issue by covering the feet with closed shoes or choosing footwear that conceals the bolts, so don't stay away from standing feet entirely because of it.

Putting the Savings Elsewhere
For customers who only want to use the doll in bed, with no plans to display her standing or shower with her, non-standing feet are cheaper, lighter and fine. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly acceptable when the doll will mostly be in a bed or on a sofa. This is an entirely valid choice for purchasers who know what they want.

Softness as a Selling Point
More comfortable to touch, for some customers, are non-standing feet, which are somewhat softer and more adaptable. Specifically looking for maximum softness? Then this subtle difference, though not normally enough to justify the choice on its own, is worth knowing about. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Tearing and Collapse
With non-standing feet the big risk is purchasers forgetting what kind of feet they have, then attempting to stand the doll regardless. Expect genuine damage from this usual mistake, because the foam inside the ankle can't support the doll's weight and will tear or collapse. Even if you attempt to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're purchasing them.

Decide Before You Order
One more question: can a doll that doesn't have standing feet be fitted with them subsequently? The short answer is that it can't readily be done. The bolts are embedded in the soles during manufacturing, and adding them later needs cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original. Better than trying to add them later is acquiring a doll with standing feet in the first place, if you're considering a doll without them and think you might want them later.

Selecting Between Standing and Non-Standing Feet
For buyers who are picking between standing and non-standing feet, the sensible advice is simple. If any of photographing the doll, displaying her standing, or employing her in the shower is on the cards, you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly acceptable. If you're on the fence, go with standing feet, the safer alternative, because nothing is ruled out and the small extra cost is worth paying.

A 45kg Male Doll That Can't Stand
Another consideration worth mentioning concerns gender. Generally, standing feet advantage male dolls more than female dolls, because male dolls are heavier and more hard to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. The ability to store upright is given to male dolls by standing feet, and that's a genuine benefit for buyers who don't have a lot of room.

Apparent Hardness at the Bottom
There's a final note to make on the aesthetic difference between standing and non-standing feet. Standing feet are slightly harder at the bottom, because of the bolts, and this can be noticeable when the doll is barefoot. Some purchasers find this less aesthetically gratifying, especially on dolls with delicate features, because the hard soles look marginally industrial. Non-standing feet are softer and more natural-looking, which some purchasers prefer. For barefoot photos as a priority, factor this trade-off into your decision; otherwise, it only matters if you're photographing the doll barefoot.

A Quick Routine Check
One more angle worth considering: maintenance. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out totally can cause the doll to collapse. A mild twist of the bolts every few months checks them; if they feel loose, tighten them with the suitable tool. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them somewhat lower-maintenance in the long run.

Displaying a Standing Doll on a Hard Floor
Standing on distinct surfaces is also impacted by the bolts. With carpet, the bolts grip well and the doll is stable. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is smooth. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to avoid sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

Non-Standing Feet Are Slightly Shorter
The doll's overall proportions are influenced by standing feet, a final consideration that's often overlooked. The way the doll looks in barefoot photos can marginally change, as the bolts add a small amount of length to the foot. The effect is subtle and normally invisible in shoes, but it's worth knowing about if you're planning to photograph the doll barefoot and you care about precise proportions. No bolts means no such effect with non-standing feet, whose feet are a little shorter and more natural-looking.

Additional Cost for Extra Options
Standing feet are worth the extra cost for most customers, which is the bottom line, because they open up posing, display, storage and shower alternatives that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Standing feet are the better choice for everyone else, and one of the simplest upgrades to justify. More info at this The Essential Primer on Sex Dolls- Start Here 81ea9fb and don't forget A Straight-Up Overview of Sex Dolls Right Now- Before You Spend a Penny on top of An Honest Look at Sex Dolls Right Now- No Hype Just Facts which is worth considering with A No-BS Primer on Sex Dolls- Read Before You Buy as well as A Candid Breakdown of Sex Dolls- Before You Spend a Penny not to mention The Complete Lowdown on Modern Sex Dolls- Before You Spend a Penny not forgetting sites such as The No-Nonsense Primer on Modern Sex Dolls- Before You Spend a Penny and don't forget A Quick Lowdown on Sex Dolls Right Now- No Hype Just Facts not to mention The Ultimate Rundown of Modern Sex Dolls- What Nobody Tells You and A Brutally Honest Lowdown on Sex Dolls- Read Before You Buy. Also check out internet for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]