[FrankJScott]

[center][/center]

[center]CLICK HERE FOR BEST SEX DOLL FEET GUIDE HERE[/center]

Standing Feet Vs Non-Standing Feet: What The Difference Means
Think of standing feet as a feature nobody thinks about until they need it, when the difference proves enormous. The spec sheet gives it a line or less, but it changes what you can do with the doll, how she stores, how she photographs and how she wears over time. Knowing the difference before you order is among the simplest ways to dodge a frustrating purchase.

Trying to Stand Her Will Damage the Feet
There's an uncomplicated basic difference. Metal bolts embedded in the soles of standing feet allow the doll to stand upright without support. No bolts in non-standing feet means the doll can only sit or lie down, and trying to stand her will damage the feet. Having the bolts or not is the key, and everything else follows from that.

Why Photographers Specify Standing Feet
You need standing feet for photography and display. Full-length poses without noticeable supports, and display anywhere that needs her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. Most photographers specify standing feet when ordering for this chief reason: it opens up a wide range of poses and settings that aren't possible with non-standing feet.

Metal Bolts Keep Water Out of the Feet
Showering is another case where standing feet are vital. If you want to shower with your doll, she needs to be able to stand, because lying her down in a shower is both impractical and unsafe. The standing feet give her stability in a wet environment, and the metal bolts ensure that the feet don't absorb water the way non-standing feet would. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Fundamentally Unfixable Once It Starts
Shower use is the source of a lot of damaged dolls, which makes the point worth expanding. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become evident but is essentially unfixable once it starts. Nevertheless diligent you are, keep a doll with non-standing feet out of the shower, because the water will find its way in irrespective of your precautions.

Standing Storage Explained
In some setups, standing feet also make storage easier. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a solid alternative. Preferred by some purchasers is the apparent and accessible storage that standing feet make possible.

A More Involved Manufacturing Process
The disadvantage of standing feet is that they're a little more expensive and somewhat heavier. Why the premium? The metal bolts add a small quantity of weight to the doll, manufacturing is more involved, and the cost normally ends up a few percent higher than a doll with non-standing feet. The difference is small, and it's normally worth the extra cost, but it's worth knowing about if you're buying on an incredibly tight budget.

The Other Disadvantage: Apparent Bolts
Another downside is that the bolts can become noticeable if the feet are bare. If the doll wears high-heeled shoes or open-toed footwear, the bolts might be noticeable in photos, which some purchasers find distracting. This is a small aesthetic issue, and it can be solved by covering the feet with closed shoes or by opting for footwear that hides the bolts, so it's not a reason to steer clear of standing feet entirely.

Putting the Savings Elsewhere
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Non-standing feet are perfectly acceptable if she'll spend most of her life in a bed or on a sofa, and the money saved can be redirected to articulated hands, a better wig or other upgrades. This is a totally valid choice for customers who know what they want.

What Non-Standing Feet Feel Like
Marginally softer and more pliable, non-standing feet are more comfortable to touch for some customers. Subtle as it is, and not typically enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Permanent Damage to the Feet
The sizable risk? Buyers forget what kind of feet they have and attempt to stand the doll in any case. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's real damage from a widespread error. Permanently damaged feet are the cause of a doll that can no longer stand even if you attempt to support her. Keep in mind that non-standing feet are non-standing, if that's what you're acquiring, and don't be tempted to test their limits.

If You Might Want Them Later
Also worth asking is whether standing feet can be retrofitted to a doll that lacks them. The short answer is that it can't easily be done. Adding the bolts subsequently requires cutting into the feet and installing new hardware, which is expensive and frequently doesn't work as well as the original, because they're embedded in the soles during manufacturing. When you think you might want standing feet later and you're considering a doll without them, it's better to buy a doll with standing feet first than attempt to add them later.

Bed or Sofa Only: Non-Standing Is Fine
The practical advice for purchasers picking between standing and non-standing feet is simple. If you plan to photograph the doll, display her standing, or use her in the shower, you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly acceptable. If you're on the fence, go with standing feet, the safer alternative, because nothing is ruled out and the small extra cost is worth paying.

Why Male Dolls Need Standing Feet More
Gender plays a part too, and it's worth mentioning. Standing feet usually help male dolls more than female dolls, since they're heavier and more tough to store in any other way. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and needs more space. Male dolls can store upright with standing feet, which is a real upside for buyers who don't have a lot of room.

A Trade-Off That Matters for Barefoot Photos
To finish, the aesthetic difference between standing and non-standing feet is worth noting. Standing feet have a slightly harder bottom because of the bolts, and this can be visible with the doll barefoot. Dolls with fragile features especially suffer, some purchasers feel, because the hard soles look slightly industrial and less aesthetically satisfying. Softer and more natural-looking, non-standing feet are preferred by some purchasers. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

Check Every Few Months by Gently Twisting
Maintenance is another angle that's worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Marginally lower-maintenance in the long run, non-standing feet don't have this issue as there's no hardware to come loose.

A Small Mat or Grippy Pad
The bolts also influence how the doll stands on distinct surfaces. The doll is steady on carpet, where the bolts grip well. Particularly if the floor is smooth, the bolts can slip on hard flooring, and the doll may need additional support to stay upright. A small mat or a grippy pad under the feet will avoid sliding on a hard surface, so consider one. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

If You Care About Exact Proportions
Frequently overlooked, there's a final consideration in how standing feet impact the doll's overall proportions. The foot gets a small amount of additional length from the bolts, and that can slightly change the way the doll looks in barefoot photos. It's worth knowing about if you're planning to photograph the doll barefoot and you care about specific proportions, though this is a subtle effect and normally invisible in shoes. Lacking the bolts, non-standing feet avoid this effect and are marginally shorter and more natural-looking.

The Bottom Line: Standing Feet Are Worth It
The additional cost of standing feet is worth it for most buyers, because they open up posing, display, storage and shower choices that non-standing feet don't; that's the bottom line. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. The better choice for everyone else is standing feet, one of the simplest upgrades to justify. More info at this The Ultimate Word on Modern Sex Dolls- Start Here 9fb5c05 on top of The Real Rundown of Sex Dolls Right Now- What to Expect and A Candid Overview of Sex Dolls- Read Before You Buy. Also check out browse around this site and don't forget source material here and this article for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]