[FrankJScott]

[center][/center]

[center]SEE THE BEST SEX DOLL FEET ADVICE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
It's only when customers need standing feet that they notice them, and the difference is gigantic. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Grasp the difference before ordering and you'll have stayed away from an irritating purchase in one of the simplest ways possible.

Metal Bolts Embedded in the Soles
Boiled down, the difference is straightforward. With standing feet, metal bolts are embedded in the soles, letting the doll stand upright without support. Non-standing feet don't have these bolts, which means the doll can only sit or lie down, and attempting to stand her will damage the feet. Whether the bolts are present decides everything else; they're the key.

Display Possibilities With Standing Feet
Standing feet are what photography and display depend on. With a doll that can stand unaided you get full-length poses without noticeable supports and display in a corner, a doorway, or anywhere else that requires her to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the principal reason most photographers specify standing feet when ordering.

A Real Safety Consideration
Shower use makes standing feet necessary too. Standing is the only sensible way to shower with your doll, because lying her down in a shower is impractical and hazardous. The metal bolts ensure that the feet don't absorb water the way non-standing feet would, and the standing feet give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a real safety consideration.

Foam or Filler Inside the Ankle
The shower use point is worth expanding, because it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become visible and being essentially unfixable once it starts. A doll with non-standing feet should never be in the shower, no matter how diligent you are, because the water will find its way in anyway of your precautions.

Upright in a Corner, Wardrobe or Cabinet
Another upside of standing feet is easier storage in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. A great alternative for customers who want to display the doll rather than keep her hidden, this is also space-efficient for those who don't have room for a hanging setup. With the standing feet, the doll can be stored visibly and accessibly, which some purchasers prefer.

Weight and Price Trade-Offs
A drawback of standing feet: they're marginally more expensive and somewhat heavier. Price-wise, a doll with standing feet is usually a few percent higher than one with non-standing feet; the metal bolts add a small quantity of weight and manufacturing is more involved. If you're purchasing on an incredibly tight budget, know that the difference is small and it's ordinarily worth the extra cost.

Closed Shoes Hide the Bolts
The bolts can show if the feet are bare, which is the other disadvantage. High-heeled shoes or open-toed footwear on a doll can leave the bolts noticeable in photos, which some purchasers find distracting. The slight aesthetic issue goes away with closed shoes or footwear that hides the bolts, which means it's not a reason to steer clear of standing feet totally.

A Doll for the Bed or Sofa
Non-standing feet are cheaper and lighter, and they're fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her. Where most of her life will be spent in a bed or on a sofa, non-standing feet are perfectly enough and leave money for upgrades like articulated hands or a better wig. A totally valid choice, this, for purchasers who know what they want.

What Non-Standing Feet Feel Like
Also, non-standing feet are a little softer and more flexible, something some customers find more comfortable to touch. Not usually enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Non-standing dolls have feet that feel more like the rest of the doll and less like they have a hard core inside them.

Tearing and Collapse
The huge risk? Purchasers forget what kind of feet they have and try to stand the doll anyway. It's a usual error with genuine outcomes, since the foam inside the ankle can't support the doll's weight and will tear or collapse. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. Acquiring non-standing feet? Remember they're non-standing, and don't be tempted to test their limits.

Bolts Are Embedded During Manufacturing
There's also the question of whether standing feet can be retrofitted to a doll that doesn't have them. In short, no, not readily. Because the bolts are embedded in the soles during manufacturing, adding them after that means cutting into the feet and installing new hardware, a pricey process that often doesn't work as well as the original. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats attempting to add them later.

Bed or Sofa Only: Non-Standing Is Fine
The practical advice on choosing between standing and non-standing feet is simple. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. Non-standing feet are perfectly sufficient if you only want to use her in bed or on a sofa and you don't care about display. Standing feet make sense if you're not sure: they don't restrict what you can do with the doll, and they're worth the small extra cost.

Why Male Dolls Need Standing Feet More
Another consideration worth mentioning concerns gender. Male dolls tend to advantage more than female dolls from standing feet, as they're heavier and more tough to store in any other way. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and requires more space. It's a genuine advantage for buyers who don't have a lot of room that standing feet let male dolls store upright.

Harder Soles Because of the Bolts
A last word on the aesthetic difference between standing and non-standing feet is worthwhile. Apparent when the doll is barefoot can be the minor hardness at the bottom of standing feet, which the bolts cause. The hard soles look slightly industrial, so some customers find this less aesthetically pleasing, especially on dolls with fragile features. Non-standing feet are softer and more natural-looking, which some purchasers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

A Bolt That Falls Out Can Make the Doll Collapse
A maintenance angle is also worth considering. Standing feet need to be checked periodically to make sure the bolts are secure, because a loose bolt can damage the foot or the ankle, and a bolt that falls out totally can cause the doll to collapse. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the fitting tool. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're slightly lower-maintenance in the long run.

Stopping Sliding
Standing on distinct surfaces is also impacted by the bolts. On carpet, the doll is steady, the bolts gripping well. On smooth hard flooring in particular, the bolts can slip, and the doll may need additional support to stay upright. Hard surface under the feet? Consider a small mat or a grippy pad to avoid sliding. If you're planning to display a doll with standing feet on a hard floor, know this. Non-standing feet are exempt, as the doll isn't standing in the first place.

Bolts Add a Little Length to the Foot
There's one more consideration that's regularly overlooked: standing feet affect the doll's overall proportions. Marginally changing the way the doll looks in barefoot photos is a possible effect of the small amount of length the bolts add to the foot. If you care about precise proportions and plan to photograph the doll barefoot, this subtle effect, generally invisible in shoes, is worth knowing about. Non-standing feet lack the bolts and thus this effect, leaving the feet a little shorter and more natural-looking.

Select Standing Unless You're Certain
Bottom line: for most customers standing feet are worth the additional cost, opening up posing, display, storage and shower choices that non-standing feet don't. The only purchasers who should skip them are those who are certain the doll will only be used in bed and won't be displayed or photographed standing. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this rosslink. Also check out i thought about this as well as visit the site on top of you could try these out and don't forget special info not forgetting sites such as read the article not to mention link and don't forget you could try this out bearing in mind more helpful hints bearing in mind here are the findings and pop over to this web-site for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]