[FrankJScott]

[center][/center]

[center]VIEW THE BEST SEX DOLL FEET ADVICE NOW[/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
Few customers think about standing feet beforehand, yet the difference, once they need them, is massive. It's a small detail on the spec sheet, but it changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. Understand the difference before ordering and you'll have steered clear of a frustrating purchase in one of the simplest ways possible.

The Difference Explained Simply
It's a direct difference, at its most basic. Standing feet have metal bolts embedded in the soles, which allow the doll to stand upright without support. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

Vital for Photography and Display
For photography and display, standing feet are vital. Full-length poses without evident supports, and display anywhere that requires her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. A wide range of poses and settings that aren't possible with non-standing feet opens up, and that's the primary reason most photographers specify standing feet when ordering.

A Real Safety Consideration
Shower use is another thing for which standing feet are critical. It's impractical and dangerous to lie her down in a shower, which is why a doll for showering with needs to be able to stand. A wet environment is no difficulty for stability with standing feet, and the metal bolts ensure the feet don't absorb water the way non-standing feet would. Water absorption in non-standing feet can lead to rust and eventual structural failure, so this is a genuine safety consideration.

Why Shower Use Destroys So Many Dolls
It's worth expanding on shower use, since it's the source of a lot of damaged dolls. With non-standing feet, the foam or filler material inside the ankle soaks up water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become evident but is basically unfixable once it starts. A doll with non-standing feet shouldn't ever be in the shower: the water will find its way in anyway of your precautions, no matter how attentive you are.

Upright in a Corner, Wardrobe or Cabinet
There's also easier storage with standing feet in some setups. Upright storage in a corner, a wardrobe, or a storage cabinet is possible for a doll with standing feet, and no hanging hook or storage case is needed. For customers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a great alternative. The standing feet make it possible to store the doll in a way that's evident and accessible, which some buyers prefer.

Weight and Price Trade-Offs
The cost you pay for standing feet is that they're slightly more expensive and somewhat heavier. The metal bolts add a small quantity of weight to the doll, and the manufacturing process is more involved, so the price is normally a few percent higher than a doll with non-standing feet. The additional cost is usually worth it and the difference is small, but an incredibly tight budget makes it worth knowing about.

Picking Footwear That Conceals Them
The bolts can show if the feet are bare, which is the other drawback. On a doll with high-heeled shoes or open-toed footwear, the bolts might be visible in photos, which some purchasers find distracting. This is a slight aesthetic issue, and it can be solved by covering the feet with closed shoes or by choosing footwear that hides the bolts, so it's not a reason to avoid standing feet entirely.

A Doll for the Bed or Sofa
Fine for purchasers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Most of her life in a bed or on a sofa means non-standing feet will be perfectly acceptable, and you can put the savings into other upgrades like articulated hands or a better wig. Customers who know what they want can make this choice totally validly.

No Hard Core Inside
Some buyers find non-standing feet more comfortable to touch, being slightly softer and more flexible. If you're specifically looking for maximum softness it's worth knowing about, even though this is a subtle difference that's not typically enough to justify the choice on its own. On non-standing dolls the feet feel more like the rest of the doll, not like they have a hard core inside them.

Permanent Damage to the Feet
The big risk with non-standing feet is that buyers forget what kind of feet they have and attempt to stand the doll regardless. The foam inside the ankle can't support the doll's weight. It tears or collapses, and that's genuine damage from a typical mistake. A doll that can no longer stand, even if you attempt to support her, is the result, because the feet have been permanently damaged. Remember that non-standing feet are non-standing, if you're purchasing them, and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. The short answer is no, not easily. The original bolts are embedded in the soles during manufacturing, and a subsequently addition needs cutting into the feet and installing new hardware, which is expensive and often not as solid. It's better to purchase a doll with standing feet in the first place than to attempt to add them later if you're considering buying a doll without standing feet and think you might want them later.

Useful Advice by Use Case
Deciding between standing and non-standing feet comes with straightforward practical advice. Photographing the doll, displaying her standing, or employing her in the shower? Then you need standing feet. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly acceptable. The safer pick when you're is standing feet; they limit nothing, and the small extra cost is worth it.

Lying Down Storage Needs More Space
A gender consideration is also worth mentioning. Male dolls are heavier and harder to store in any other way, so they generally benefit from standing feet more than female dolls. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and needs more space. A real benefit for purchasers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

Barefoot Photography Priorities
The aesthetic difference between standing and non-standing feet is worth a final note. A little harder at the bottom is how standing feet are, because of the bolts, and it can be evident when the doll is barefoot. The hard soles look a little industrial, so some purchasers find this less aesthetically pleasing, particularly on dolls with fragile features. Non-standing feet look softer and more natural, and some customers prefer that. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

Non-Standing Feet Are Lower-Maintenance
A maintenance angle is also worth considering. Every few months, bolts on standing feet want a once-over, because one that works loose can damage the foot or ankle, and one that drops out altogether can bring the doll down. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're a little lower-maintenance in the long run.

Carpet Grips Well
How the doll stands on distinct surfaces is also influenced by the bolts. Grip is decent on carpet, and the doll is constant. Bolts can slip on hard flooring, particularly a smooth floor, so the doll may need extra support to stay upright. Sliding is stopped on a hard surface by a small mat or a grippy pad under the feet, which you should consider. Worth knowing about if you're displaying a doll with standing feet on a hard floor; non-standing feet don't have it, the doll not standing in the first place.

The Final Consideration
One final consideration, frequently overlooked, is how standing feet affect the doll's overall proportions. Slightly changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. It's a subtle effect that's typically invisible in shoes, yet worth knowing about for barefoot photography when you care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are slightly shorter and more natural-looking.

What Standing Feet Open Up
The extra cost of standing feet is worth it for most purchasers, because they open up posing, display, storage and shower options that non-standing feet don't; that's the bottom line. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this The Essential Breakdown of Modern Sex Dolls- No Hype Just Facts 8781ea9 bearing in mind The Full Deep Dive Into Modern Sex Dolls- What Actually Matters and An Honest Deep Dive Into Sex Dolls Right Now- What Actually Matters. Also check out navigate to these guys together with check out here and read this post here for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]