[FrankJScott]

[center][/center]

[center]VIEW THE BEST SEX DOLL FEET ADVICE HERE[/center]

Standing Feet Vs Non-Standing Feet Explained: Which Should You Choose
Standing feet are one of those features that purchasers don't think about until they need them, and then they discover the difference is gigantic. Small detail on the spec sheet, large results: what the doll can do, how she stores, how she photographs and how she wears over time all change. If you grasp the difference before you order, you've avoided an annoying purchase in one of the simplest ways there is.

The Basic Difference Between Standing and Non-Standing Feet
The core difference is an uncomplicated one. Standing feet come with metal bolts embedded in the soles, and these allow the doll to stand upright without support. No bolts in non-standing feet means the doll can only sit or lie down, and attempting to stand her will damage the feet. Everything else follows from whether the bolts are present or not, because the bolts are the key.

Why Photographers Specify Standing Feet
For photography and display, standing feet are crucial. With a doll that can stand unaided you get full-length poses without noticeable supports and display in a corner, a doorway, or anywhere else that requires her to be upright. It opens up a wide range of poses and settings that aren't possible with non-standing feet, which is why most photographers specify standing feet when ordering.

Stability in a Wet Environment
Showering is another case where standing feet are crucial. It's impractical and risky to lie her down in a shower, which is why a doll for showering with needs to be able to stand. Metal bolts make sure that the feet don't absorb water the way non-standing feet would; the standing feet also give her stability in a wet environment. Because water absorption in non-standing feet can lead to rust and eventual structural failure, this is a real safety consideration.

Water Rusts the Metal Skeleton
A lot of damaged dolls come from shower use, so the point is worth expanding. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Basically unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become evident. Never put a doll with non-standing feet in the shower, nonetheless cautious you are, since the water will find its way in regardless of your precautions.

Standing Storage Explained
In some setups, standing feet also make storage easier. With standing feet she can be stored upright in a corner, a wardrobe or a storage cabinet, without the need for a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient alternative, and for anyone who wants to display the doll rather than keep her hidden it's a great one. Standing feet make noticeable and accessible storage possible, which suits some customers best.

A Few Percent More Expensive
Standing feet cost marginally more and weigh a little more, and that's the downside. You'll generally pay a few percent more than for non-standing feet, because the metal bolts add a small amount of weight and manufacturing is more involved. For buyers on a very tight budget it's worth knowing about, even though the difference is small and it's usually worth the additional cost.

Not a Reason to Avoid Standing Feet
Another disadvantage is that the bolts can become visible if the feet are bare. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some customers find this distracting. This trivial aesthetic issue is easily solved by covering the feet with closed shoes or by picking footwear that hides the bolts; it's no reason to avoid standing feet entirely.

Putting the Savings Elsewhere
Non-standing feet cost less and weigh less, and they suit customers who only want to use the doll in bed and won't display her standing or shower with her. A doll that lives largely in a bed or on a sofa gets by perfectly well on non-standing feet, with the savings available for upgrades like articulated hands or a better wig. This choice is entirely valid for purchasers who know what they want.

Softness as a Selling Point
Non-standing feet are slightly softer and more elastic too, and some customers find that more comfortable to touch. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. The feet of non-standing dolls feel more like the rest of her and less as if there's a hard core inside.

Trying to Stand the Doll Anyway
Buyers now and then forget what kind of feet they have and attempt to stand the doll in any case, which is the huge risk with non-standing feet. Why is this common oversight so damaging? The foam inside the ankle can't support the doll's weight, and it'll tear or collapse. The result is a doll that can no longer stand even if you attempt to support her, because the feet have been permanently damaged. Resist the temptation to test the limits of non-standing feet, and remember that they're non-standing, if you're acquiring them.

Why Retrofitting Doesn't Work Well
Then there's the question of whether standing feet can be retrofitted to a doll without them. The short answer is a no, not readily. During manufacturing the bolts are embedded in the soles; doing it after that means cutting into the feet and installing new hardware, which is pricey and frequently doesn't work as well as the original. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats attempting to add them later.

Photography, Display or Shower: You Need Standing Feet
Picking between standing and non-standing feet? The functional advice is straightforward. Standing feet are a must if you plan to photograph the doll, display her standing, or use her in the shower. Perfectly adequate are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. If you're on the fence, go with standing feet, the safer option, because nothing is ruled out and the small extra cost is worth paying.

Upright Storage for Male Dolls
There's a gender consideration as well that's worth mentioning. Male dolls generally upside from standing feet more than female dolls, because they're heavier and more tough to store in any other way. If a 45kg male doll can't stand, he has to be stored lying down, which puts pressure on the body and needs more space. Not having a lot of room? Standing feet give male dolls the ability to store upright, and that's a genuine upside.

A Trade-Off That Matters for Barefoot Photos
Standing and non-standing feet differ aesthetically, which is worth a final note. Standing feet are somewhat harder at the bottom, because of the bolts, and this can be noticeable when the doll is barefoot. Some buyers don't find this aesthetically pleasing, particularly on dolls with delicate features, since the hard soles look a little industrial. Non-standing feet are more natural-looking and softer, something some customers prefer. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

A Quick Routine Check
Maintenance is another angle that's worth considering. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out totally can cause the doll to collapse. Check the bolts every few months by gently twisting them, and if they feel loose, tighten them with the suitable tool. Because non-standing feet have no hardware to come loose, they don't have this issue, and they're slightly lower-maintenance in the long run.

Stability Depends on the Surface
Distinct surfaces mean different standing behaviour, and the bolts impact it. Carpet is where the bolts grip well and the doll is steady. The doll may need extra support to stay upright on hard flooring, where the bolts can slip, especially if the floor is silky. Hard surface under the feet? Consider a small mat or a grippy pad to avoid sliding. Non-standing feet escape this issue, since the doll isn't standing in the first place; plan to display a doll with standing feet on a hard floor, though, and it's worth knowing about.

The Final Consideration
There's a final consideration that's often overlooked, which is how standing feet influence the doll's overall proportions. A small amount of length is added to the foot by the bolts, which can marginally change the way the doll looks in barefoot photos. Planning to photograph the doll barefoot and caring about precise proportions? This subtle effect, generally invisible in shoes, is worth knowing about. Non-standing feet don't have this effect, because they don't have the bolts, so the feet are somewhat shorter and more natural-looking.

Posing, Display, Storage and Shower Options
Bottom line: for most purchasers standing feet are worth the extra cost, opening up posing, display, storage and shower choices that non-standing feet don't. Only purchasers certain that the doll will stay in bed, never displayed or photographed standing, should skip them. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this The Real Rundown of Sex Dolls- Start Here 5c00_11 bearing in mind The No-Nonsense Primer on Sex Dolls Right Now- What Actually Matters and An Honest Rundown of Modern Sex Dolls- Read Before You Buy. Also check out useful link together with recommended site which is worth considering with look at this web-site together with check it out on top of special info on top of check my site which is worth considering with check this out bearing in mind click this link now which is worth considering with read here and click this link here now for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]