[FrankJScott]

[center][/center]

[center]CLICK HERE FOR THE BEST SEX DOLL FEET GUIDE HERE[/center]

Sex Doll Feet Explained: Standing Feet Vs Non-Standing Feet
Standing feet are one of those features that buyers don't think about until they need them, and then they discover the difference is gigantic. Small detail on the spec sheet, big outcomes: what the doll can do, how she stores, how she photographs and how she wears over time all change. One of the simplest ways to avoid an annoying purchase is to understand the difference before you order.

The Basic Difference Between Standing and Non-Standing Feet
There's an uncomplicated basic difference. Standing feet have metal bolts embedded in the soles, which permit the doll to stand upright without support. The doll can only sit or lie down on non-standing feet, which lack these bolts, and attempting to stand her will damage the feet. Everything else flows from the bolts, which are the key, and whether they're present or not.

Full-Length Poses Without Visible Supports
For photography and display, standing feet are crucial. With a doll that can stand unaided you get full-length poses without evident supports and display in a corner, a doorway, or anywhere else that requires her to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the principal reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
If you want shower use, standing feet are important as well. It's impractical and risky to lie her down in a shower, which is why a doll for showering with needs to be able to stand. Her stability in a wet environment is down to the standing feet, and the metal bolts keep the feet from absorbing water the way non-standing feet would. Structural failure finally, and rust, can come from water absorption in non-standing feet; that's why this is a genuine safety consideration.

Hidden Rust Inside the Leg
Expanding on the shower use point is rewarding; it's the source of a lot of damaged dolls. When it gets wet, the foam or filler material inside the ankle of non-standing feet absorbs water. From there the water rusts the metal skeleton inside the leg, taking weeks or months to become visible and being basically unfixable once it starts. Attentive or not, a doll with non-standing feet should never be in the shower; the water will find its way in whatever precautions you take.

Standing Feet Make Storage Easier
Standing feet can make storage easier as well, depending on the setup. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a good one. Evident and accessible storage is made possible by the standing feet, which some customers prefer.

What Standing Feet Cost
The disadvantage of standing feet is that they're marginally more expensive and a little heavier. A more involved manufacturing process plus a small amount of weight from the metal bolts means a price usually a few percent above a doll with non-standing feet. The extra cost is typically worth it and the difference is small, but an extremely tight budget makes it worth knowing about.

High Heels and Open-Toed Footwear
A further downside is the bolts becoming apparent if the feet are bare. Distracting to some purchasers is the possibility that the bolts are evident in photos on a doll with high-heeled shoes or open-toed footwear. Cover the feet with closed shoes or choose footwear that conceals the bolts and this small aesthetic issue is solved, so it's not a reason to steer clear of standing feet totally.

Fine for Bed-Only Dolls
Fine for customers who only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are also cheaper and lighter. Spending most of her life in a bed or on a sofa? Non-standing feet are perfectly acceptable, and the savings can go on upgrades such as articulated hands or a better wig. This choice is completely valid for customers who know what they want.

Not Enough to Decide on Its Own
Also, non-standing feet are somewhat softer and more pliable, something some buyers find more comfortable to touch. This is a subtle difference, and it's not typically enough to justify the choice on its own, but it's worth knowing about if you're specifically looking for maximum softness. A hard core inside isn't what you feel in the feet on non-standing dolls; they feel more like the rest of the doll.

Tearing and Collapse
Customers sometimes forget what kind of feet they have and try to stand the doll anyway, which is the large risk with non-standing feet. This common mistake causes genuine damage: the foam inside the ankle can't support the doll's weight, so it tears or collapses. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. Don't be tempted to test their limits if you're acquiring non-standing feet; remember that they're non-standing.

Can Standing Feet Be Retrofitted?
A further question is whether a doll that doesn't have standing feet can have them retrofitted. The short answer is a no, not easily. Expensive, and often not as good as the original, is the process of adding the bolts later by cutting into the feet and installing new hardware, since they're embedded in the soles during manufacturing. Purchase a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.

A Simple Decision Guide
When opting for between standing and non-standing feet, the useful advice is uncomplicated. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Perfectly enough are non-standing feet when you only want to use her in bed or on a sofa and you don't care about display. For the uncertain, standing feet are the safer choice; they leave you free to do whatever you like with the doll and are worth the small additional cost.

Lying Down Storage Needs More Space
Gender plays a part too, and it's worth mentioning. Heavier, and more hard to store in any other way, male dolls broadly advantage from standing feet more than female dolls. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Customers who don't have a lot of room get a real benefit from standing feet, which give male dolls the ability to store upright.

Softer, More Natural Non-Standing Feet
The aesthetic difference between standing and non-standing feet deserves a final note. The bottom of standing feet is marginally harder because of the bolts, something that can be evident when the doll is barefoot. Hard soles look somewhat industrial, which some purchasers find less aesthetically pleasing, especially on dolls with fragile features. The softer and more natural look of non-standing feet is what some buyers prefer. This trade-off only matters when you're photographing the doll barefoot, so factor it into your decision if barefoot photos are a priority.

A Quick Routine Check
Consider the maintenance angle too. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the appropriate tool. The issue doesn't arise with non-standing feet, which have no hardware to come loose, making them marginally lower-maintenance in the long run.

Carpet Grips Well
The bolts also influence how the doll stands on different surfaces. On carpet, the bolts grip well and the doll is steady. If the floor is hard, and especially smooth, the bolts can slip and the doll may need extra support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it avoids sliding. It only concerns standing feet: non-standing feet don't have the issue because the doll isn't standing in the first place, but displaying one on a hard floor makes it worth knowing about.

An Overlooked Detail: Proportions
One final consideration, regularly overlooked, is how standing feet impact the doll's overall proportions. Barefoot photos can look marginally distinct because the bolts add a small quantity of length to the foot. This subtle effect, usually invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about exact proportions. This effect isn't present in non-standing feet, as they don't have the bolts, so the feet are marginally shorter and more natural-looking.

Extra Cost for Extra Options
Most purchasers should find standing feet worth the additional cost; they open up posing, display, storage, and shower alternatives that non-standing feet don't. That's the bottom line. Who can skip them? Buyers who are certain the doll will only be used in bed and won't be displayed or photographed standing. Everyone else is better off with standing feet, one of the simplest upgrades to justify. More info at this The Ultimate Breakdown of Sex Dolls Today- The Stuff That Matters 8bd9924 together with The Definitive Lowdown on Modern Sex Dolls- The Stuff That Matters and A Candid Lowdown on Sex Dolls Right Now- What You Need to Know. Also check out browse around this web-site which is worth considering with other on top of continue reading this not forgetting sites such as discover this info here not forgetting sites such as click here for more which is worth considering with check my blog bearing in mind see this bearing in mind link on top of this site and learn more here for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]