[FrankJScott]

[center][/center]

[center]VIEW BEST SEX DOLL FEET GUIDE TODAY[/center]

What Are Standing Feet? Standing Vs Non-Standing Feet Explained
Few purchasers think about standing feet beforehand, yet the difference, once they need them, is massive. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. One of the simplest ways to steer clear of an irritating purchase is to grasp the difference before you order.

Standing Upright Without Support
At its most basic, the difference is straightforward. Standing upright without support is possible because standing feet have metal bolts embedded in the soles. No bolts in non-standing feet means the doll can only sit or lie down, and trying to stand her will damage the feet. Present or absent, the bolts are the key, and everything else follows.

Display Possibilities With Standing Feet
You need standing feet for photography and display. Anywhere that needs her to be upright, including a corner or a doorway, can display a doll that can stand unaided, and she can be photographed in full-length poses without apparent supports. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the primary reason most photographers specify standing feet when ordering.

Why Showers Demand Standing Feet
For shower use too, standing feet are crucial. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and dangerous. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. It's a genuine safety consideration since water absorption in non-standing feet can lead to rust and eventual structural failure.

Never Shower a Non-Standing Doll
Expanding on the shower use point is valuable; it's the source of a lot of damaged dolls. Non-standing feet include foam or filler material inside the ankle, and wet conditions make that material absorb water. It then rusts the metal skeleton inside the leg, which takes weeks or months to show, and once it's started it's fundamentally unfixable. Showers and non-standing feet don't mix, no matter how diligent you are, as the water will find its way in anyway of your precautions.

Evident and Accessible Storage
Another upside of standing feet is easier storage in some setups. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. Buyers who don't have room for a hanging setup will find this a space-efficient alternative, and it suits buyers who want to display the doll rather than keep her hidden. Noticeable and accessible storage is made possible by the standing feet, which some buyers prefer.

A Few Percent More Expensive
The downside of standing feet is that they're somewhat more pricey and a little heavier. A few percent extra on the cost is typical compared with a doll with non-standing feet, thanks to a small quantity of weight from the metal bolts and a more involved manufacturing process. For customers on a very tight budget it's worth knowing about, even though the difference is small and it's usually worth the additional cost.

Bolts in Photos
The other downside is that the bolts can become evident if the feet are bare. The bolts might be evident in photos on a doll with high-heeled shoes or open-toed footwear, and some buyers find that distracting. Evading standing feet totally over this would be unnecessary; it's a minor aesthetic issue that closed shoes, or footwear that conceals the bolts, will solve.

Non-Standing Feet: Cheaper and Lighter
Non-standing feet are cheaper, lighter, and perfectly fine if the doll will only be used in bed and not displayed standing or taken in the shower. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly sufficient when the doll will largely be in a bed or on a sofa. Totally valid is this choice for buyers who know what they want.

Softer, More Flexible Feet
Comfort to the touch is another point: non-standing feet are somewhat softer and more pliable, which some purchasers prefer. Subtle as it is, and not typically enough to justify the choice on its own, the difference is worth knowing about if you're specifically looking for maximum softness. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

Permanent Damage to the Feet
Customers forgetting what kind of feet they have and trying to stand the doll anyway is the sizable risk with non-standing feet. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this widespread error causes real damage. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. You're buying non-standing feet? Remember it, and don't be tempted to test their limits.

Why Retrofitting Doesn't Work Well
Then there's the question of whether standing feet can be retrofitted to a doll without them. To put it briefly, not easily, no. During manufacturing the bolts are embedded in the soles; doing it after that means cutting into the feet and installing new hardware, which is costly and often doesn't work as well as the original. Considering a doll without standing feet, and think you might want them later? Acquire a doll with standing feet in the first place; it's better than attempting to add them later.

If You're Not Sure, Choose Standing
Deciding between standing and non-standing feet comes with direct practical advice. Plans to photograph the doll, display her standing or use her in the shower mean you need standing feet. For use only in bed or on a sofa, with no care about display, non-standing feet are perfectly enough. If you're on the fence, go with standing feet, the safer option, because nothing is ruled out and the small additional cost is worth paying.

Pressure on the Body When Lying Down
A gender consideration is also worth mentioning. Standing feet generally help male dolls more than female dolls, since they're heavier and more tough to store in any other way. A 45kg male doll who can't stand must be stored lying down, putting pressure on the body and needing more space. A genuine benefit for customers who don't have a lot of room is that standing feet give male dolls the ability to store upright.

A Final Note on Appearance
A last word on the aesthetic difference between standing and non-standing feet is worthwhile. With the doll barefoot, the somewhat harder bottom of standing feet, down to the bolts, can be apparent. Dolls with fragile features notably suffer, some buyers feel, because the hard soles look somewhat industrial and less aesthetically satisfying. The softer and more natural look of non-standing feet is what some customers prefer. It's worth factoring into your decision if barefoot photos are a priority, as this trade-off only matters if you're photographing the doll barefoot.

The Maintenance Angle
A maintenance angle deserves consideration too. Secure bolts matter: loose ones can damage the foot or the ankle, a bolt that falls out can cause a collapse, and so standing feet need periodic checking. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the fitting tool. There's no hardware to come loose with non-standing feet, so they don't have this issue and are a little lower-maintenance in the long run.

Silky Floors Need Extra Support
Distinct surfaces mean distinct standing behaviour, and the bolts influence it. The bolts grip well on carpet, so the doll is stable. Bolts can slip on hard flooring, particularly a smooth floor, so the doll may need extra support to stay upright. Consider a small mat or a grippy pad beneath her feet if the surface is hard; it avoids sliding. A doll with non-standing feet isn't standing in the first place, so the issue doesn't arise; for standing feet on a hard floor, it's worth knowing about.

Usually Invisible in Shoes
Eventually, there's something that's often overlooked: how standing feet affect the doll's overall proportions. Marginally changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. You in all likelihood won't see it in shoes, as this is a subtle effect, but it's worth knowing about if you plan to photograph the doll barefoot and care about specific proportions. Without the bolts, non-standing feet don't have this effect, and the feet are slightly shorter and more natural-looking.

What Standing Feet Open Up
What it comes down to is that most customers will find standing feet worth the extra cost, since they open up posing, display, storage, and shower choices that non-standing feet don't. You're safe to skip them only when you're certain the doll will only be used in bed and won't be displayed or photographed standing. One of the simplest upgrades to justify, standing feet are the better choice for everyone else. More info at this rosslink. Also check out click this over here now for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]