[FrankJScott]

[center][/center]

[center]CLICK HERE FOR BEST SEX DOLL FEET GUIDE NOW[/center]

Standing Feet Or Non-Standing Feet? The Differences Explained
Until the moment they need them, buyers don't think about standing feet; then they find out the difference is gigantic. Small on the spec sheet, it still changes what you can do with the doll, how she stores, how she photographs, and even how she wears over time. To stay away from a frustrating purchase, comprehend the difference before you order; it's one of the simplest ways.

Bolts or No Bolts
Uncomplicated is the basic difference. Embedded in the soles of standing feet, metal bolts let the doll stand upright without support. The doll can only sit or lie down on non-standing feet, which lack these bolts, and attempting to stand her will damage the feet. The key is the bolts, and everything else follows from whether they're there.

Standing Unaided
It's standing feet that photography and display can't do without. Full-length poses without noticeable supports, and display anywhere that needs her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the primary reason most photographers specify standing feet when ordering.

Metal Bolts Keep Water Out of the Feet
Standing feet are essential for the shower as well. It's impractical and hazardous to lie her down in a shower, which is why a doll for showering with needs to be able to stand. Stability in a wet environment comes from the standing feet, and the metal bolts make sure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration, because water absorption in non-standing feet can lead to rust and eventual structural failure.

Water Will Find Its Way In
A lot of damaged dolls come from shower use, so the point is worth expanding. The ankle of a non-standing foot contains foam or filler material, which absorbs water when it gets wet. The metal skeleton inside the leg is then rusted by the water, which takes weeks or months to become evident but is essentially unfixable once it starts. No matter how diligent you are, a doll with non-standing feet should never be in the shower; water finds its way in anyway of precautions.

No Hanging Hook or Storage Case Needed
Standing feet can make storage easier as well, depending on the setup. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. It's a space-efficient option for customers without room for a hanging setup, and a solid one for buyers who'd rather display the doll than keep her hidden. The doll can be stored in a way that's evident and accessible thanks to the standing feet, and some buyers prefer this.

A More Involved Manufacturing Process
Standing feet cost slightly more and weigh a little more, and that's the downside. The metal bolts add a small amount of weight to the doll, and the manufacturing process is more involved, so the price is normally a few percent higher than a doll with non-standing feet. The difference is small, and it's normally worth the extra cost, but it's worth knowing about if you're purchasing on an incredibly tight budget.

Bolts in Photos
If the feet are bare, the bolts can become apparent; that's the other drawback. Distracting to some buyers is the possibility that the bolts are visible in photos on a doll with high-heeled shoes or open-toed footwear. Closed shoes or footwear that conceals the bolts solve this minor aesthetic issue, so it's not a reason to avoid standing feet completely.

Fine for Bed-Only Dolls
If you only want to use the doll in bed and don't plan to display her standing or shower with her, non-standing feet are fine, and cheaper and lighter too. Save on the feet, spend on articulated hands or a better wig; non-standing feet are perfectly sufficient when the doll will chiefly be in a bed or on a sofa. Where customers know what they want, this is an entirely valid choice.

Comfortable to Touch
Also, non-standing feet are slightly softer and more flexible, something some customers find more comfortable to touch. On its own this subtle difference doesn't normally justify the choice, though it's worth knowing about if you're specifically looking for maximum softness. Less like they have a hard core inside them and more like the rest of the doll is how the feet on non-standing dolls feel.

Attempting to Stand the Doll Anyway
The huge risk? Customers forget what kind of feet they have and try to stand the doll anyway. A common error, and a damaging one: the doll's weight is too much for the foam inside the ankle, which will tear or collapse. Even if you try to support her, the doll can no longer stand as a result, because the feet have been permanently damaged. If you're purchasing non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

Bolts Are Embedded During Manufacturing
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. The answer, in short, is no, not readily. The original bolts are embedded in the soles during manufacturing, and an afterwards addition needs cutting into the feet and installing new hardware, which is pricey and frequently not as solid. Purchase a doll with standing feet in the first place, rather than trying to add them later, if you're considering a doll without them and think you might want them later.

Picking Between Standing and Non-Standing Feet
For purchasers who are picking between standing and non-standing feet, the useful advice is direct. Photographing the doll, displaying her standing, or using her in the shower? Then you need standing feet. If display doesn't matter and you only want to use her in bed or on a sofa, non-standing feet are perfectly acceptable. The safer select when you're is standing feet; they limit nothing, and the small additional cost is worth it.

A Gender Consideration
There's a gender consideration as well that's worth mentioning. Standing feet advantage male dolls more than female dolls in general, as they're heavier and harder to store any other way. Pressure on the body and more space are needed when a 45kg male doll that can't stand has to be stored lying down. Male dolls can store upright with standing feet, which is a real benefit for purchasers who don't have a lot of room.

Harder Soles Because of the Bolts
Eventually, the aesthetic difference between standing and non-standing feet is worth noting. The bolts make standing feet a little harder at the bottom, and this can be visible when the doll is barefoot. Some customers consider it less aesthetically satisfying, particularly with fragile features, because of the marginally industrial look of the hard soles. Softness and a natural look are what non-standing feet offer, and some customers prefer them. Photographing the doll barefoot is the only time this trade-off matters, and it's worth factoring into your decision if barefoot photos are a priority.

Check Every Few Months by Gently Twisting
Maintenance is another angle that's worth considering. Keep an eye on the bolts in standing feet, since a loose bolt can damage the foot or the ankle while a bolt that falls out completely can make the doll collapse. Gently twist the bolts every few months to check them, and if they feel loose, tighten them with the fitting tool. With no hardware to come loose, non-standing feet steer clear of this issue and are slightly lower-maintenance in the long run.

How the Bolts Behave on Different Surfaces
How the doll stands on different surfaces is also influenced by the bolts. Carpet is where the bolts grip well and the doll is steady. Additional support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a smooth floor. On hard surfaces, a small mat or a grippy pad under the feet is worth considering to avoid sliding. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

The Final Consideration
There's one more consideration that's frequently overlooked: standing feet influence the doll's overall proportions. Slightly changing the way the doll looks in barefoot photos is a possible effect of the small quantity of length the bolts add to the foot. This subtle effect, typically invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about specific proportions. No bolts means no such effect with non-standing feet, whose feet are somewhat shorter and more natural-looking.

The Better Choice for Everyone Else
The bottom line is that standing feet are worth the extra cost for most buyers, because they open up posing, display, storage, and shower alternatives that non-standing feet don't. The exception is the purchaser who's certain the doll will only be used in bed and won't be displayed or photographed standing. For all other customers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out web link for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]