[FrankJScott]

[center][/center]

[center]DISCOVER BEST SEX DOLL FEET ADVICE TODAY[/center]

Understanding Standing Feet Vs Non-Standing Feet On A Sex Doll
Think of standing feet as a feature nobody contemplates until they need it, when the difference proves enormous. Small detail on the spec sheet, sizable consequences: what the doll can do, how she stores, how she photographs and how she wears over time all change. If you understand the difference before you order, you've steered clear of an annoying purchase in one of the simplest ways there is.

Standing Upright Without Support
Uncomplicated is the basic difference. Without support, a doll with standing feet can stand upright, thanks to the metal bolts embedded in the soles. Damage to the feet is the result of trying to stand a doll with non-standing feet, which don't have these bolts and so only allow sitting or lying down. Whether the bolts are present decides everything else; they're the key.

Upright Without Props
Standing feet are what photography and display depend on. Full-length poses without evident supports, and display anywhere that needs her to be upright, such as a corner or doorway, are open to a doll that can stand unaided. The primary reason most photographers specify standing feet when ordering is the wide range of poses and settings it opens up that non-standing feet rule out.

Lying Her Down in a Shower Is Impractical and Dangerous
Also critical is standing feet for shower use. Standing is the only reasonable way to shower with your doll, because lying her down in a shower is impractical and hazardous. In a wet environment the standing feet give her stability, while the metal bolts ensure that the feet don't absorb water the way non-standing feet would. This is a real safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

Why Shower Use Destroys So Many Dolls
Worth expanding is the shower use point, as it's the source of a lot of damaged dolls. Non-standing feet have foam or filler material inside the ankle, and that material absorbs water when it gets wet. Once it starts, the rusting of the metal skeleton inside the leg by the water is basically unfixable, though it takes weeks or months to become evident. Because the water will find its way in irrespective of your precautions, a doll with non-standing feet should never be in the shower, no matter how cautious you are.

Space-Efficient Storage
Some setups make standing feet easier to store as well. You can store a doll with standing feet upright in a corner, a wardrobe or a storage cabinet without a hanging hook or a storage case. For buyers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a decent option. Some customers prefer the evident, accessible storage that the standing feet make possible.

A Few Percent More Expensive
The cost you pay for standing feet is that they're slightly more costly and marginally heavier. The metal bolts add a small quantity of weight to the doll, and the manufacturing process is more involved, so the cost is generally a few percent higher than a doll with non-standing feet. If you're buying on an extremely tight budget, know that the difference is small and it's normally worth the additional cost.

Solving the Visible Bolt Problem
The second drawback is that bare feet can show the bolts. With high-heeled shoes or open-toed footwear, the bolts might be visible in photos, something some buyers find distracting. No reason to avoid standing feet totally, since this trivial aesthetic issue can be solved with closed shoes or footwear that hides the bolts.

Know What You Want
Non-standing feet cost less and weigh less, and they suit customers who only want to use the doll in bed and won't display her standing or shower with her. Most of her life in a bed or on a sofa means non-standing feet will be perfectly sufficient, and you can put the savings into other upgrades like articulated hands or a better wig. It's an entirely valid choice if you know what you want.

Comfortable to Touch
More comfortable to touch, for some buyers, are non-standing feet, which are marginally softer and more elastic. Not typically enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Feeling more like the rest of the doll, and less like they have a hard core inside them, are the feet on non-standing dolls.

Tearing and Collapse
Purchasers at times forget what kind of feet they have and attempt to stand the doll in any case, which is the sizable risk with non-standing feet. A typical oversight, and a damaging one: the doll's weight is too much for the foam inside the ankle, which will tear or collapse. The feet have been permanently damaged, so the doll can no longer stand even if you try to support her. Don't be tempted to test their limits if you're purchasing non-standing feet; remember that they're non-standing.

Decide Before You Order
Whether standing feet can be retrofitted to a doll that doesn't have them is another question. In short, no, not easily. During manufacturing the bolts are embedded in the soles; doing it subsequently means cutting into the feet and installing new hardware, which is costly and regularly doesn't work as well as the original. If you might want standing feet later, and you're considering a doll without them, purchasing a doll with standing feet in the first place beats attempting to add them later.

Opting for Between Standing and Non-Standing Feet
For purchasers who are opting for between standing and non-standing feet, the useful advice is simple. Photographing the doll, displaying her standing, or employing her in the shower? Then you need standing feet. Don't care about display and only want to use her in bed or on a sofa? Non-standing feet are perfectly acceptable. If you're on the fence, go with standing feet, the safer choice, because nothing is ruled out and the small extra cost is worth paying.

Heavier Dolls Are Harder to Store
There's a gender consideration as well that's worth mentioning. Standing feet upside male dolls more than female dolls in general, as they're heavier and harder to store any other way. There's no option but to store a 45kg male doll that can't stand lying down, which puts pressure on the body and requires more space. For purchasers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a real benefit.

A Final Note on Appearance
Worth a final note is the aesthetic difference between standing and non-standing feet. Noticeable when the doll is barefoot can be the slight hardness at the bottom of standing feet, which the bolts cause. Some buyers find this less aesthetically pleasing, particularly on dolls with fragile features, because the hard soles look slightly industrial. Non-standing feet are softer and more natural-looking, which some purchasers prefer. The trade-off only matters if you're photographing the doll barefoot; if barefoot photos are a priority, it's worth factoring into your decision.

Non-Standing Feet Are Lower-Maintenance
Worth considering, too, is a maintenance angle. The bolts in standing feet need a periodic check to confirm they're secure, because the worst case is a bolt falling out completely and the doll collapsing, with a loose one damaging the foot or ankle on the way there. Tighten the bolts with the suitable tool if they feel loose when you check them every few months by gently twisting. Non-standing feet don't have this issue, because there's no hardware to come loose, which makes them marginally lower-maintenance in the long run.

How the Bolts Behave on Different Surfaces
Distinct surfaces mean distinct standing behaviour, and the bolts impact it. The doll is steady on carpet, where the bolts grip well. If the floor is hard, and particularly smooth, the bolts can slip and the doll may need additional support to stay upright. On a hard surface, consider using a small mat or a grippy pad under the feet to prevent sliding. The doll isn't standing in the first place with non-standing feet, so there's no issue there; with standing feet on a hard floor, it's worth knowing about.

If You Care About Exact Proportions
There's a final consideration that's often overlooked, which is how standing feet influence the doll's overall proportions. A small quantity of length is added to the foot by the bolts, which can a little change the way the doll looks in barefoot photos. If you care about exact proportions and plan to photograph the doll barefoot, this subtle effect, generally invisible in shoes, is worth knowing about. Lacking the bolts, non-standing feet avoid this effect and are a little shorter and more natural-looking.

What Standing Feet Open Up
The bottom line is that standing feet are worth the extra cost for most purchasers, because they open up posing, display, storage, and shower options that non-standing feet don't. Nobody should skip them unless they're certain the doll will only be used in bed and won't be displayed or photographed standing. Anyone else should go for standing feet, the better choice and one of the simplest upgrades to justify. More info at this An Honest Lowdown on Sex Dolls Today- Read Before You Buy bd99242 bearing in mind Your Ultimate Primer on Sex Dolls Right Now- Start Here and The Definitive Rundown of Sex Dolls Today- No Hype Just Facts. Also check out helpful resources as well as find out here bearing in mind i loved this which is worth considering with hop over to this website bearing in mind get redirected here as well as basics not to mention hop over to these guys as well as click here for more not forgetting sites such as my link and useful site for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]