[FrankJScott]

[center][/center]

[center]CLICK HERE FOR BEST SEX DOLL FEET ADVICE TODAY[/center]

Standing Feet Vs Non-Standing Feet Explained: A Buyer's Guide
Buyers seldom think about standing feet before they need them, and once they do, the difference turns out to be vast. Everything from what you can do with the doll to how she stores, photographs and wears over time shifts because of this small detail on the spec sheet. One of the simplest ways to stay away from an annoying purchase is to understand the difference before you order.

Trying to Stand Her Will Damage the Feet
The basic difference is straightforward. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. If the feet are non-standing, there are no bolts, so the doll can only sit or lie down; stand her and you'll damage the feet. Having the bolts or not is the key, and everything else follows from that.

Why Photographers Specify Standing Feet
It's standing feet that photography and display can't do without. A doll that stands unaided can be photographed full-length with no noticeable supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. Poses and settings aren't possible with non-standing feet in the wide range that standing feet open up, which is the main reason most photographers specify standing feet when ordering.

Stability in a Wet Environment
Standing feet are also necessary for shower use. If you want to shower with your doll, she must be able to stand, since laying her down in a shower is impractical as well as dangerous. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. Structural failure in the end, and rust, can come from water absorption in non-standing feet; that's why this is a real safety consideration.

Hidden Rust Inside the Leg
A lot of damaged dolls come from shower use, so the point is worth expanding. Foam or filler material sits inside the ankle of non-standing feet, and it absorbs water when it gets wet. Rust follows as the water attacks the metal skeleton inside the leg; it takes weeks or months to become visible, but it's basically unfixable once it starts. Because the water will find its way in regardless of your precautions, a doll with non-standing feet should never be in the shower, no matter how careful you are.

When You Lack Room for a Hanging Setup
Standing feet can make storage easier as well, depending on the setup. Without needing a hanging hook or a storage case, a doll with standing feet can be stored upright in a corner, a wardrobe or a storage cabinet. Without room for a hanging setup, this is a space-efficient choice, and for anyone who wants to display the doll rather than keep her hidden it's a decent one. The doll can be stored in a way that's noticeable and accessible thanks to the standing feet, and some purchasers prefer this.

A More Involved Manufacturing Process
On the disadvantage, standing feet are somewhat more expensive and slightly heavier. A more involved manufacturing process plus a small quantity of weight from the metal bolts means a cost normally a few percent above a doll with non-standing feet. Typically worth the additional cost, and small, the difference is still worth knowing about on a very tight budget.

Closed Shoes Hide the Bolts
The other downside is that the bolts can become visible if the feet are bare. Photos of a doll in high-heeled shoes or open-toed footwear might show the bolts, which some buyers find distracting. This trivial aesthetic issue is easily solved by covering the feet with closed shoes or by opting for footwear that hides the bolts; it's no reason to steer clear of standing feet totally.

Perfectly Adequate for Many Buyers
Purchasers who only want to use the doll in bed, and don't plan to display her standing or shower with her, will find non-standing feet fine, as well as cheaper and lighter. For a doll that's going to spend most of her life in a bed or on a sofa, non-standing feet are perfectly adequate, and the savings can go towards other upgrades like articulated hands or a better wig. Where buyers know what they want, this is a completely valid choice.

A Subtle Difference
The softer, more elastic feel of non-standing feet, small as it is, is more comfortable to touch for some purchasers. Not generally enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. The feet on non-standing dolls feel more like the rest of the doll and less like they have a hard core inside them.

Permanent Damage to the Feet
Non-standing feet carry a huge risk, which is buyers forgetting what kind of feet they have and trying to stand the doll anyway. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this common oversight causes real damage. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. Remember that non-standing feet are non-standing, if you're buying them, and don't be tempted to test their limits.

Cutting Into the Feet Is Expensive and Risky
Then there's the question of whether standing feet can be retrofitted to a doll without them. Briefly: no, and certainly not readily. Costly, and often not as solid as the original, is the process of adding the bolts afterwards by cutting into the feet and installing new hardware, since they're embedded in the soles during manufacturing. Attempting to add standing feet later is worse than buying a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, acquire them first.

Photography, Display or Shower: You Need Standing Feet
If you're choosing between standing and non-standing feet, the functional advice is direct. You'll need standing feet for photographing the doll, displaying her standing, or using her in the shower. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly acceptable. The safer pick when you're is standing feet; they limit nothing, and the small additional cost is worth it.

A Gender Consideration
A gender consideration deserves a mention as well. Male dolls broadly benefit from standing feet more than female dolls, because they're heavier and more difficult to store in any other way. Lying down storage is a must for a 45kg male doll that can't stand, and it puts pressure on the body and requires more space. For purchasers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a genuine benefit.

Barefoot Photography Priorities
The aesthetic difference between standing and non-standing feet is worth a final note. On standing feet the bottom is a little harder thanks to the bolts, and that can show when the doll is barefoot. Some buyers consider it less aesthetically pleasing, particularly with fragile features, because of the marginally industrial look of the hard soles. Some purchasers prefer non-standing feet, which are softer and more natural-looking. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

Tighten With the Appropriate Tool
Worth considering, too, is a maintenance angle. Periodic checks keep standing feet safe, given that a loose bolt can damage the foot or the ankle and a bolt falling out completely can cause the doll to collapse. If the bolts feel loose when you gently twist them to check, which you should do every few months, tighten them with the fitting tool. Non-standing feet escape this issue because there's no hardware to come loose, which makes them somewhat lower-maintenance long term.

Stability Depends on the Surface
Another effect of the bolts is on how the doll stands on distinct surfaces. With carpet, the bolts grip well and the doll is stable. On hard flooring, the bolts can slip, especially if the floor is silky, and the doll may need extra support to stay upright. Sliding on a hard surface? A small mat or grippy pad under the feet prevents it. Standing feet on a hard floor is the case to know about here, since non-standing feet don't have this issue, the doll not standing in the first place.

Barefoot Photos and Exact Proportions
Last of all, and often overlooked, is how standing feet affect the doll's overall proportions. The way the doll looks in barefoot photos can marginally change, as the bolts add a small quantity of length to the foot. Planning to photograph the doll barefoot and caring about specific proportions? This subtle effect, usually invisible in shoes, is worth knowing about. No bolts means no such effect with non-standing feet, whose feet are slightly shorter and more natural-looking.

What Standing Feet Open Up
The extra cost of standing feet is worth it for most buyers, because they open up posing, display, storage and shower options that non-standing feet don't; that's the bottom line. Skip them if, and only if, you're certain the doll will only be used in bed and won't be displayed or photographed standing. For all other purchasers, standing feet are the better choice and among the simplest upgrades to justify. More info at this rosslink. Also check out click this link and don't forget clicking here and my blog for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]