[FrankJScott]

[center][/center]

[center]DISCOVER THE BEST SEX DOLL FEET GUIDE TODAY[/center]

Standing Feet Vs Non-Standing Feet Explained: Pros, Cons And Picks
Until the moment they need them, customers don't think about standing feet; then they find out the difference is gigantic. A small detail on the spec sheet, sure, but it changes how the doll stores, photographs and wears over time, as well as what you can do with her. Understanding the difference before you order is one of the simplest ways to avoid an annoying purchase.

Why Non-Standing Dolls Can Only Sit or Lie Down
The difference comes down to something uncomplicated. What lets the doll stand upright without support is the metal bolts embedded in the soles of standing feet. Sitting or lying down is all a doll with non-standing feet can do, as they don't have these bolts, and attempting to stand her will damage the feet. Key to it all are the bolts; everything else follows from whether they're present.

Full-Length Poses Without Visible Supports
Standing feet are a must for photography and display. A doll that stands unaided can be photographed full-length with no evident supports, and displayed in a corner, a doorway, or anywhere else she needs to be upright. This opens up a wide range of poses and settings that aren't possible with non-standing feet, and it's the primary reason most photographers specify standing feet when ordering.

Water Absorption Leads to Rust
If you want shower use, standing feet are crucial as well. Want to shower with your doll? She has to be able to stand, since lying her down in a shower is impractical and unsafe. The feet don't absorb water the way non-standing feet would, because the metal bolts ensure that, and the standing feet give her stability in a wet environment. This is a genuine safety consideration; water absorption in non-standing feet can lead to rust and eventual structural failure.

The Source of a Lot of Damaged Dolls
Expanding on the shower use point is worthwhile; it's the source of a lot of damaged dolls. Non-standing feet include foam or filler material inside the ankle, and wet conditions make that material absorb water. Basically unfixable once it starts, the rust the water causes in the metal skeleton inside the leg takes weeks or months to become apparent. A doll with non-standing feet should never be in the shower, no matter how diligent you are, because the water will find its way in anyway of your precautions.

Storing Her Standing Up
In some setups, standing feet also make storage easier. A corner, a wardrobe or a storage cabinet can hold a doll with standing feet upright, with no need for a hanging hook or a storage case. For purchasers who don't have room for a hanging setup this is space-efficient, and for those who want to display the doll rather than keep her hidden it's a solid option. Standing feet allow storage that's apparent and accessible, something some purchasers prefer.

Incredibly Tight Budgets and Standing Feet
Standing feet are a little more expensive and a little heavier, which is their drawback. Metal bolts add a small quantity of weight to the doll. Manufacturing is also more involved. The upshot is a cost that's usually a few percent higher than a doll with non-standing feet. It's worth knowing about if you're acquiring on a really tight budget, though the difference is small and typically worth the additional cost.

High Heels and Open-Toed Footwear
There's another drawback: the bolts can become apparent if the feet are bare. In photos, the bolts might show on a doll wearing high-heeled shoes or open-toed footwear, and some purchasers find this distracting. Cover the feet with closed shoes or opt for footwear that hides the bolts and this minor aesthetic issue is solved, so it's not a reason to avoid standing feet completely.

Non-Standing Feet: Cheaper and Lighter
Non-standing feet cost less and weigh less, and they suit customers who only want to use the doll in bed and won't display her standing or shower with her. Most of her life in a bed or on a sofa means non-standing feet will be perfectly acceptable, and you can put the savings into other upgrades like articulated hands or a better wig. A completely valid choice, this, for customers who know what they want.

A Subtle Difference
Comfort to the touch is another point: non-standing feet are a little softer and more elastic, which some purchasers prefer. Not usually enough to justify the choice on its own, this subtle difference is worth knowing about if maximum softness is what you're specifically after. Rather than feeling as if they have a hard core inside them, the feet on non-standing dolls feel more like the rest of the doll.

Foam in the Ankle Can't Take the Weight
Non-standing feet carry a huge risk, which is customers forgetting what kind of feet they have and trying to stand the doll anyway. The foam inside the ankle will tear or collapse under the doll's weight, since it can't support it, so this usual slip-up causes real damage. The result: the feet are permanently damaged, and the doll can no longer stand even if you try to support her. If you're buying non-standing feet, remember that they're non-standing, and don't be tempted to test their limits.

Adding Bolts Afterwards
Then there's the question of whether standing feet can be retrofitted to a doll without them. Not easily; that's the short answer. The original bolts are embedded in the soles during manufacturing, and a subsequently addition needs cutting into the feet and installing new hardware, which is expensive and frequently not as good. Trying to add standing feet later is worse than purchasing a doll with standing feet in the first place, so if you're considering a doll without them and might want them later, purchase them first.

Worth the Small Extra Cost
The sensible advice on picking between standing and non-standing feet is uncomplicated. Should you plan to photograph the doll, display her standing, or use her in the shower, standing feet are what you need. Only want her in bed or on a sofa, and don't care about display? Non-standing feet are perfectly sufficient. Standing feet are the safe default if you can't decide, as they never limit what you can do with the doll and the small additional cost is worth it.

Weight and Storage Together
Another consideration worth mentioning concerns gender. Because they're heavier and more tough to store in any other way, male dolls generally advantage from standing feet more than female dolls. A 45kg male doll that can't stand is a doll that has to be stored lying down, which puts pressure on the body and requires more space. For purchasers who don't have a lot of room, standing feet give male dolls the ability to store upright, which is a real benefit.

Apparent Hardness at the Bottom
Standing and non-standing feet differ aesthetically, which is worth a final note. Slightly harder at the bottom is how standing feet are, because of the bolts, and it can be visible when the doll is barefoot. Some customers find this less aesthetically gratifying, particularly on dolls with delicate features, because the hard soles look somewhat industrial. The softer and more natural look of non-standing feet is what some buyers prefer. Only if you're photographing the doll barefoot does this trade-off matter, and it's worth factoring into your decision if barefoot photos are a priority.

A Quick Routine Check
Another angle worth considering is maintenance. Look over the bolts on standing feet now and again to make sure they're secure; a loose bolt can damage the foot or ankle, and a lost bolt can cause the doll to collapse. By gently twisting the bolts every few months you can check them, and if they feel loose, use the suitable tool to tighten them. No hardware means nothing to come loose, so non-standing feet don't have this issue and are marginally lower-maintenance in the long run.

Silky Floors Need Extra Support
How well the doll stands on different surfaces depends in part on the bolts. Grip is solid on carpet, and the doll is steady. Extra support to stay upright may be needed on hard flooring, as the bolts can slip, particularly on a silky floor. To stop sliding on a hard surface, consider a small mat or a grippy pad beneath the feet. No issue with non-standing feet, as the doll isn't standing in the first place. Displaying a doll with standing feet on a hard floor is where it's worth knowing about.

Bolts Add a Little Length to the Foot
A final, frequently overlooked, consideration is the effect of standing feet on the doll's overall proportions. Barefoot photos can look somewhat distinct because the bolts add a small quantity of length to the foot. This subtle effect, typically invisible in shoes, matters if you're planning to photograph the doll barefoot and you care about exact proportions. No bolts means no such effect with non-standing feet, whose feet are somewhat shorter and more natural-looking.

Posing, Display, Storage and Shower Options
At the end of the day, standing feet are worth the extra cost for most purchasers, as they open up options for posing, display, storage and the shower that non-standing feet don't. Customers who are sure the doll will only be used in bed, and won't be displayed or photographed standing, are the only ones who should skip them. Everyone else should opt for standing feet, which are the better choice and one of the simplest upgrades to justify. More info at this rosslink. Also check out see this site not forgetting sites such as like it and advice for more.
[center][/center]

[center]CHECK OUT THE BEST SEX DOLL GUIDE ONLINE[/center]